Total 71 Senior Executive environmental engineer job vacancies in Customer Service category in Hong Kong

Responsibilities:

• New Device Introduction: Perform tape-out/tooling operations for customer design database and achieve the goal of first pilot success.
• Project coordination: Customer interface and cross department coordination with seamless communications.
• Manage conference calls, meetings and customer visits with professional presentation skills and logistics arrangement for project success.
• Project management: Documentation, summary, meeting minutes and ability to recap keynote of meetings for management team review.

Requirements:

• MS or Bachelor degree in Electrical engineering or relevant.
• At least 5 years of fab working experience and process integration engineering background is preferable.
• Good knowledge in wafer process flow, semiconductor device physics, wafer foundry service flow.
• Strong in problem solving and project management skills.
• Excellent personality, good interpersonal skills, self-motivated, well-organized and able to perform under pressure.

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

An overview of this role

As a Senior Customer Success Engineer, you'll expand your impact by partnering with customers in GitLab's group across APJ to help them get measurable value from GitLab through hands-on technical guidance and proactive enablement. You'll serve as a trusted technical advisor, partnering with customers over Zoom and email to improve adoption, unblock implementations, and apply DevSecOps best practices across the software delivery lifecycle. Working closely with Account Executives and Renewals Managers, you'll align technical recommendations to customer goals and help support renewals and expansion by demonstrating outcomes. You'll also contribute back to the broader GitLab team by sharing learnings through documentation and enablement content, while mentoring team members and customers through complex technical challenges. This role is a strong fit for someone who enjoys solving complex technical problems, communicates clearly, and thrives in a remote, asynchronous environment. You're eager to grow into customer-facing technical leadership with strong mentorship and support from a collaborative team.

What you’ll do

• Provide on-demand technical consultancy and solution guidance to help customers solve day-to-day issues and design and implement GitLab solutions for their DevSecOps workflows.

• Drive product adoption and measurable customer value across APJ accounts to support renewals and expansion.

• Deliver technical and architectural guidance across source code management, CI/CD, DevSecOps, and Agile planning to unblock implementations and improve adoption.

• Partner with Account Executives and Renewals Managers to align technical recommendations to customer objectives and account plans that support retention and growth.

• Plan and lead customer workshops, demos, and enablement sessions that help teams adopt GitLab confidently and drive measurable adoption and value, supporting renewals and expansion across APJ.

• Maintain and grow your specialty competency in GitLab capabilities and relevant DevSecOps tooling, staying current on new product features and patterns.

• Contribute to scalable enablement by improving documentation, sharing knowledge through internal and external channels (for example, tutorials or technical content), and mentoring team members and customers to build technical competency and adoption.

• Manage multiple customer engagements in parallel, prioritizing effectively and communicating status, risks, and next steps to keep implementations on track.

• Strategize on the overall objectives and long-range goals of the team

• Provide mentorship for CSEs to help them grow in their technical knowledge and provide premium customer experience

• Work cross-departmentally to find solutions to complex scenarios and integration issues

• Demonstrate leadership in new feature and technology adoption and teaching by providing regular enablement and solution overview sessions and documentation for customers and other GitLab team-members

• Help drive team expertise and technical thought leadership

• Maintain deep knowledge of the GitLab platform

What you’ll bring

• Experience with a GitLab use case (SCM, CI, CD, DevSecOps, Agile Planning) to provide in-depth customer guidance and enablement

• Proficiency using DevSecOps tools or highly technical tooling in adjacent fields

• Specialize in GitLab use cases to provide in-depth guidance and enablement to customers of all sizes, including large enterprise organizations

• Technical experience in development or systems engineering

• Demonstrated capacity to clearly and concisely communicate about complex technical, architectural, and/or organizational problems and propose thorough iterative solutions

• Have demonstrated the ability to become a trusted technical advisor to customer and business leaders

• Exceptional verbal, presentation, and written communication skills

• Excellent time management and ability to work with several different teams at any given time

• Extends the Customer Success Engineer requirements

• Ability to translate business requirements into business value, and work with sales and marketing to promote value-driven solutions

• Expert in GitLab usage and able to train others in its usage

• Advanced knowledge of software development lifecycle and development pipeline

• Advanced project management experience & skills

About the team

In this role, you'll support our customers across APJ, delivering workshops, demos, and best-practice guidance while contributing back to our shared documentation and enablement resources.

About Us

Trinet Technologies Pte Ltd is a leading provider of advanced security and surveillance solutions, offering end-to-end services from design and supply to installation and maintenance. We are expanding our team and looking for a skilled and motivated Senior Service Engineer to join us.

Key Responsibilities

Plan, organize, and oversee daily service and maintenance operations

Perform installation, testing, commissioning, and troubleshooting of security systems (e.g., CCTV, access control, surveillance systems)

Ensure timely completion of service jobs and projects

Provide technical guidance and support to team members

Liaise with customers to ensure high service standards and satisfaction

Maintain proper documentation of service reports and operational activities

Requirements

Minimum 2 years of relevant experience in servicing and maintaining security or surveillance systems

Possess a valid Class 3/3A Driving Licence

Strong leadership and team management skills

Ability to organize and manage day-to-day operations effectively

Hands-on, independent, and able to work under pressure

Good communication and interpersonal skills

Candidate with experience in CCTV, access control, or security systems will have an added advantage

What We Offer

Competitive salary package

Opportunities for career growth and advancement

Supportive and dynamic team environment

Training and development opportunities

How to Apply

Interested candidates are invited to submit their resume to hr@trinet.com.sg, only shortlisted candidates will be notified.

Responsibilities:

• Carry out routine maintenance and troubleshooting of chiller systems to ensure reliable operation and optimal efficiency.
• Deliver professional customer support by responding promptly to client queries and issues related to chiller operations and maintenance.
• Diagnose and rectify mechanical, electrical, and control system faults with effective corrective actions.
• Advise and educate clients on proper operating and maintenance practices to extend equipment lifespan.
• Prepare clear and detailed service reports, including work performed, findings, and improvement recommendations.
• Perform commissioning for new chiller installations, ensuring systems are correctly installed and operate according to specifications.
• Coordinate with clients, agents, and contractors to verify system performance and compliance with technical requirements.
• Build strong working relationships with contractors to promote teamwork and effective problem-solving.
• Share technical knowledge with contractors to enhance processes and overall service quality.
• Comply strictly with workplace safety regulations and procedures during all service activities.
• Conduct safety briefings to ensure all parties are aware of and adhere to safety responsibilities.
• Operate in various site environments, including outdoor and plant room settings.
• Perform field-based duties with regular travel to customer locations.
• Provide standby support and respond to chiller breakdowns when assigned.

Qualifications:

• Diploma or higher qualification in Engineering, preferably in Electrical or Mechanical disciplines.
• 3–5 years of hands-on experience in chiller maintenance, commissioning, or related HVAC roles.
• Certified in Building Construction Supervisors Safety Courses or equivalent safety training.
• Strong technical expertise in chiller systems, HVAC fundamentals, and electrical control systems.
• Demonstrated problem-solving ability with strong attention to detail.
• Effective communication and interpersonal skills to work well with clients and internal teams.
• Capable of working independently while managing time and priorities efficiently.
• Consistently meet maintenance schedules and ensure all tasks are completed on time.
• Proven ability to accurately diagnose and repair chiller system faults through systematic assessments.
• Maintain a high level of professionalism and technical competence in all customer engagements.
• Communicate clearly and promptly with customers on service progress, timelines, and updates.
• Provide clear explanations of work performed and practical recommendations for future maintenance.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Responsibilities:

• Carry out routine maintenance and troubleshooting of chiller systems to ensure reliable operation and optimal efficiency.
• Deliver professional customer support by responding promptly to client queries and issues related to chiller operations and maintenance.
• Diagnose and rectify mechanical, electrical, and control system faults with effective corrective actions.
• Advise and educate clients on proper operating and maintenance practices to extend equipment lifespan.
• Prepare clear and detailed service reports, including work performed, findings, and improvement recommendations.
• Perform commissioning for new chiller installations, ensuring systems are correctly installed and operate according to specifications.
• Coordinate with clients, agents, and contractors to verify system performance and compliance with technical requirements.
• Build strong working relationships with contractors to promote teamwork and effective problem-solving.
• Share technical knowledge with contractors to enhance processes and overall service quality.
• Comply strictly with workplace safety regulations and procedures during all service activities.
• Conduct safety briefings to ensure all parties are aware of and adhere to safety responsibilities.
• Operate in various site environments, including outdoor and plant room settings.
• Perform field-based duties with regular travel to customer locations.
• Provide standby support and respond to chiller breakdowns when assigned.

Qualifications:

• Diploma or higher qualification in Engineering, preferably in Electrical or Mechanical disciplines.
• 3–5 years of hands-on experience in chiller maintenance, commissioning, or related HVAC roles.
• Certified in Building Construction Supervisors Safety Courses or equivalent safety training.
• Strong technical expertise in chiller systems, HVAC fundamentals, and electrical control systems.
• Demonstrated problem-solving ability with strong attention to detail.
• Effective communication and interpersonal skills to work well with clients and internal teams.
• Capable of working independently while managing time and priorities efficiently.
• Consistently meet maintenance schedules and ensure all tasks are completed on time.
• Proven ability to accurately diagnose and repair chiller system faults through systematic assessments.
• Maintain a high level of professionalism and technical competence in all customer engagements.
• Communicate clearly and promptly with customers on service progress, timelines, and updates.
• Provide clear explanations of work performed and practical recommendations for future maintenance.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Critical Development Cloud Support Engineer (Senior Engineer, Hybrid Cloud) 

Job Description 

• Provide technical support for maintenance, patching, and upkeep of Microsoft, Nutanix and Citrix server systems, load balancers, and proxies. 

• Assist in managing compliance-related tasks to ensure regulatory adherence. 

• Collaborate in troubleshooting and resolving system issues to minimise downtime. 

• Support day-to-day service and change requests, ensuring timely and efficient delivery. 

• Manage IT equipment inventory, including tracking, condemnation, and disposal processes. 

• Coordinate with vendors and clients to facilitate deployments, system refreshes, and other technical initiatives.  

Qualifications 

• At least Degree in Computer science / IT / Engineering or equivalent 

• Good technical skills in engineering, computer, and IT systems, and preferably in communications technologies as well 

• Good working knowledge of Life Cycle Management and Systems Engineering in Windows server platform not limited to Microsoft System Centre suite of products. 

• Proficiency in Microsoft Server Operating System, Nutanix Acropolis Hypervisor, Ubuntu, Redhat, ⁠Citrix Virtual Desktop, BeyondTrust PIM/PAM, RSA Security Appliance, Splunk, Solarwinds, Tenable VMS, Veeam Backup, Ansible Automation Platform, Tenable VMS etc. 

• At least 1-3 years’ experience in Information Technology industry in the areas of Microsoft, Nutanix or Citrix system implementation, project management and O&S. 

• Good communication and writing skills 

• Shall have experience in performing project management, handle technical challenges and in liaising with the user and vendor to define business requirements and deliver technical solution. 
  

  JOB-00487
  

  All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

  Kindly email your resume in a detailed Word format to swathi.dhar@peopleprofilers.com

  Only shortlisted candidates will be notified.

  People Profilers Pte Ltd

  20 Cecil Street, #08-09 PLUS Building Singapore 049705

  +65 6950 9747   

  EA Licence Number: 02C4944

  Reg. Number: R1111371

  EA Personnel: Swathi Dhar
  

The Senior Field Service Engineer (FSE) is a critical customer-facing role responsible for delivering expert-level technical support to customers in the SMT and Semiconductor industries across Singapore and the Asia region. The role supports the product portfolio, with a strong emphasis on software installation, system setup, commissioning, and advanced troubleshooting. In addition to technical excellence, the role requires commercial awareness, enabling the engineer to identify and articulate opportunities for software upgrades, options, and service offerings that create customer value. This position operates with high autonomy and represents the Company at a senior technical level in front of customers.

Key responsibilities

• Provide expert-level on-site and remote support to customers in SMT and Semiconductor manufacturing environments

• Perform installation, software setup, configuration, and commissioning of systems

• Execute preventive and corrective maintenance, system upgrades, and equipment relocations

• Diagnose and resolve complex software, hardware, and process-related issues to minimise production downtime

• Act as a senior escalation point for complex or non-standard field issues

• Independently install, configure, and validate software in customer production environments

• Support customers during ramp-up and stabilisation phases following installation or upgrades

• Identify opportunities for software upgrades, system options, and service offerings during field activities

• Provide primary support for Singapore-based customers and regional support across Asia with flexibility for short-notice travel

• Work closely with Sales, Applications, Product Support, and R&D teams to resolve issues and improve products and processes

About you

• Degree or Diploma in Engineering (Electrical, Electronics, Mechatronics, Mechanical, or related discipline), or equivalent practical experience

• Minimum 8 years of relevant experience in field service or technical support within the SMT and/or Semiconductor industry

• Strong hands-on experience in SMT assembly, with inspection background (e.g. SPI, AOI, AXI) highly desirable

• Proven experience independently handling complex customer situations and system installations

• Strong software capability, including system setup, configuration, and troubleshooting

• Excellent analytical and problem-solving skills

• High level of autonomy, accountability, and customer focus

• Strong communication skills with the ability to engage both technical and non-technical stakeholders

• Fluent in English (mandatory)

• Chinese language capability preferred to support regional customer interactions

Responsibilities:

• Carry out routine maintenance and troubleshooting of chiller systems to ensure reliable operation and optimal efficiency.
• Deliver professional customer support by responding promptly to client queries and issues related to chiller operations and maintenance.
• Diagnose and rectify mechanical, electrical, and control system faults with effective corrective actions.
• Advise and educate clients on proper operating and maintenance practices to extend equipment lifespan.
• Prepare clear and detailed service reports, including work performed, findings, and improvement recommendations.
• Perform commissioning for new chiller installations, ensuring systems are correctly installed and operate according to specifications.
• Coordinate with clients, agents, and contractors to verify system performance and compliance with technical requirements.
• Build strong working relationships with contractors to promote teamwork and effective problem-solving.
• Share technical knowledge with contractors to enhance processes and overall service quality.
• Comply strictly with workplace safety regulations and procedures during all service activities.
• Conduct safety briefings to ensure all parties are aware of and adhere to safety responsibilities.
• Operate in various site environments, including outdoor and plant room settings.
• Perform field-based duties with regular travel to customer locations.
• Provide standby support and respond to chiller breakdowns when assigned.

Qualifications:

• Diploma or higher qualification in Engineering, preferably in Electrical or Mechanical disciplines.
• 3–5 years of hands-on experience in chiller maintenance, commissioning, or related HVAC roles.
• Certified in Building Construction Supervisors Safety Courses or equivalent safety training.
• Strong technical expertise in chiller systems, HVAC fundamentals, and electrical control systems.
• Demonstrated problem-solving ability with strong attention to detail.
• Effective communication and interpersonal skills to work well with clients and internal teams.
• Capable of working independently while managing time and priorities efficiently.
• Consistently meet maintenance schedules and ensure all tasks are completed on time.
• Proven ability to accurately diagnose and repair chiller system faults through systematic assessments.
• Maintain a high level of professionalism and technical competence in all customer engagements.
• Communicate clearly and promptly with customers on service progress, timelines, and updates.
• Provide clear explanations of work performed and practical recommendations for future maintenance.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Job Responsibilities :-

·      Design and develop audio visual/solutions including schematics, floor plans and wiring diagrams

·      Installation of audio visual systems, including equipment placement, cabling and integration with other systems

·      Ensure that all audio visual systems meet industry standards and project requirements

·      Test and troubleshoot audio visual systems to identify and resolve any issues

·      Create and maintain project documentation, including system manuals, as-built drawings, and testing report

·      Work with technical team to schedule and perform regular system maintenance, including firmware updates, software upgrades and hardware replacements

·      Stay up-to date with industry trends, technologies and best practices for audio visual system design and installation

·      Communicate project updates and status to project managers and clients as needed

Requirements :-

·      Diploma/Higher Nitec in  Electrical & Electronics, Mechanical, Mechatronic, IT or related disciplines.

·      Candidate must be diligent and possess good communication skills – oral or written – to be able to interact with customers and suppliers effectively.

·      A team player.

·      Have strong organizational skills and strong follow-up skills

·      Able to complete all tasks assigned in a timely fashion.

·      Possess a high level of commitment and initiative.

·      Preferably with at least 1-2 years' experience in relevant field

Benefits :-

·      Competitive remuneration package which commensurate with experience and qualifications

·      5-day work week with good work-life balance

·      Comprehensive insurance and medical benefits

·      Local and overseas training available.

Product area

The Platforms and Devices team encompasses Google's various computing software platforms across environments (desktop, mobile, applications), as well as our first party devices and services that combine the best of Google AI, software, and hardware. Teams across this area research, design, and develop new technologies to make our user's interaction with computing faster and more seamless, building innovative experiences for our users around the world.

Job description

As a Customer Engineer in the technical sales team, you will be supporting the enterprise segment. You will equip companies with Google tools to make technology at work more simple, secure and shareable. You will inspire leading companies and government agencies to work smarter with cloud or web first strategies through Chrome Enterprise and take advantage of advanced enterprise capabilities for administrative controls.

Qualifications

Job responsibilities

• Act as the primary platforms and devices enterprise solutions technical lead on key accounts. Bring together cross-functional agreement team members to design and execute comprehensive technical sales strategies and opportunity technical win plans.
• Work with the sales team to guide and accelerate the transition of leading companies, partners and government agencies to Chrome Enterprise, which encompasses Chrome Enterprise Premium, Chrome Operating System (OS), and their collective management tools.
• Identify key customer technical objections and develop the strategy to resolve technical impediments.
• Provide proactive consultation and strategic guidance for utilizing scalable enablement and funding programs to accelerate proof-of-concepts and pilots.
• Own the technical sales motion to accelerate new bookings, upsells, and expansions across the core enterprise portfolio (Chrome Enterprise Premium, ChromeOS, Cameyo, Pixel/AE, etc.).

Minimum qualifications

• Bachelor’s degree or equivalent practical experience.
  
• 10 years of experience in a customer-facing or technical project management role.
• 5 years of experience working with enterprise operating systems including Chrome.
• Ability to communicate in English and Mandarin fluently in order to communicate in this customer-facing role.
  

Preferred qualifications

• Experience in the following areas of IT infrastructure: networking (e.g., VPN, Wireless, protocols), identity management (e.g., SSO, SAML, ActiveDirectory), and security (e.g., VPN, firewalls).
• Experience with application delivery including: web application and integration (e.g., HTML5, JavaScript, CSS), VDI solutions (e.g., Citrix, VMWare, RDP), and mobile apps.
• Experience with managed endpoint devices (e.g., PC or mobile), and the growing ecosystem of browser-based applications and collaboration tools.
  
• Deep knowledge of Google Cloud Platform or Google Workspace solutions.

Senior End-User Support Engineer (L3)

Job Title: Senior End-User SupportEngineer (L3)
Monthly Salary: $8,500 – $11,000 SGD
Location: Singapore
Employment Type: Full-time, Permanent

Roles & Responsibilities

• Act as the highest level of escalation for complex end-user computing incidents (OS, application, network, access issues)
• Own the Problem Management process – conduct root cause analysis (RCA) for recurring incidents
• Lead post-incident reviews and drive permanent fixes to reduce ticket volumes
• Design and maintain knowledge base articles for L1/L2 support teams
• Mentor and provide technical guidance to junior support engineers
• Collaborate with engineering teams (EUC, Network, Security) to resolve cross-domain issues
• Proactively identify areas for automation and efficiency improvements in support processes
• Manage major incident bridges and coordinate with multiple teams for resolution
• Create PowerShell scripts to automate repetitive support tasks
• Review change requests impacting end-user computing environment
• Prepare weekly incident trend reports for IT management
• Act as the final approval point for complex technical solutions

Job Requirements

• Bachelor's Degree in Information Technology, Computer Science, or equivalent experience
• Minimum 7 years of experience in end-user support, with at least 2 years at L3 level
• Deep expertise in Windows OS internals, registry, group policy, and troubleshooting
• Advanced knowledge of Intune, Azure AD, and Microsoft 365 administration
• Strong scripting skills in PowerShell and/or Bash
• ITIL v4 Managing Professional certification required
• Microsoft 365 Certified: Endpoint Administrator Associate preferred
• Excellent analytical and problem-solving skills with attention to detail
• Proven ability to remain calm under pressure during major incidents
• Singaporeans and PRs are encouraged to apply.

Responsibilities:

• Carry out routine maintenance and troubleshooting of chiller systems to ensure reliable operation and optimal efficiency.
• Deliver professional customer support by responding promptly to client queries and issues related to chiller operations and maintenance.
• Diagnose and rectify mechanical, electrical, and control system faults with effective corrective actions.
• Advise and educate clients on proper operating and maintenance practices to extend equipment lifespan.
• Prepare clear and detailed service reports, including work performed, findings, and improvement recommendations.
• Perform commissioning for new chiller installations, ensuring systems are correctly installed and operate according to specifications.
• Coordinate with clients, agents, and contractors to verify system performance and compliance with technical requirements.
• Build strong working relationships with contractors to promote teamwork and effective problem-solving.
• Share technical knowledge with contractors to enhance processes and overall service quality.
• Comply strictly with workplace safety regulations and procedures during all service activities.
• Conduct safety briefings to ensure all parties are aware of and adhere to safety responsibilities.
• Operate in various site environments, including outdoor and plant room settings.
• Perform field-based duties with regular travel to customer locations.
• Provide standby support and respond to chiller breakdowns when assigned.

Qualifications:

• Diploma or higher qualification in Engineering, preferably in Electrical or Mechanical disciplines.
• 3–5 years of hands-on experience in chiller maintenance, commissioning, or related HVAC roles.
• Certified in Building Construction Supervisors Safety Courses or equivalent safety training.
• Strong technical expertise in chiller systems, HVAC fundamentals, and electrical control systems.
• Demonstrated problem-solving ability with strong attention to detail.
• Effective communication and interpersonal skills to work well with clients and internal teams.
• Capable of working independently while managing time and priorities efficiently.
• Consistently meet maintenance schedules and ensure all tasks are completed on time.
• Proven ability to accurately diagnose and repair chiller system faults through systematic assessments.
• Maintain a high level of professionalism and technical competence in all customer engagements.
• Communicate clearly and promptly with customers on service progress, timelines, and updates.
• Provide clear explanations of work performed and practical recommendations for future maintenance.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Overview

Microsoft has an exciting opportunity for an experienced service engineer to join our Sovereign Cloud Program, working to build out and support the operations infrastructure in Microsoft’s National Partner Clouds (NPCs).

NPCs are specialized cloud environments that are designed to comply with the data laws of specific countries and regions.  You would be part of the team responsible for

• enabling secure cross-domain data transfer between the Azure public cloud and the NPCs
• enabling secure operational access to the NPCs for the local operations team
• NPC operations infrastructure – including WAN and LAN connectivity

These capabilities enable secure data transfer between platforms, and have critical and demanding security, sovereignty, monitoring and control requirements. Coupled with the challenges of supporting complex environments across disparate security domains, these roles create exciting complex engineering and service support challenges you can solve with us!

Microsoft’s mission is to empower every person and every organization on the planet to achieve more.  As employees we come together with a growth mindset, innovate to empower others, and collaborate to realize our shared goals.

Each day we build on our values of respect, integrity, and accountability to create a culture of inclusion where everyone can thrive at work and beyond.

Responsibilities

• You’ll be a critical member of a geo-distributed team responsible for designing, implementing and supporting operations capabilities within high-assurance, secure and highly available environments.  Your role as a senior engineer will mean you are responsible for the outcomes the team delivers as well as ensuring other team members grow and learn to deliver better outcomes themselves.
• You’ll be responsible for championing, implementing and refining DevOps practices in order to improve operational efficiency while ensuring other requirements, such as security, are not compromised.
• You’ll lead design, code and security reviews across teams to identify risks and prevent classes of bugs prior to release by applying expertise in application design, security, and other relevant technologies.
• You’ll understand the capabilities and limitations of existing tools and resources, and the customer impact of design trade-offs and exceptions, to drive and optimize team decision making.
• You’ll actively drive 24/7/365 support, which means participating in rotating on-call duties. Your responsiveness and problem-solving skills will be crucial.
• Collaboration across the global organization is essential. You’ll be a contact point between teams, driving cross-team information sharing and process reuse in order to enhance efficiency and consistency.
• Working closely with security teams, you’ll ensure adherence to security standards. This involves integrating security practices into all aspects of your work. By maintaining a strong security posture, you’ll protect critical assets.
• You should expect to need to travel to the in-country Sovereign Operations Centers on a regular basis. This physical presence is vital for effective coordination, monitoring, and collaboration within the center.  Exact frequency to be agreed,  but needs to be frequent enough to build strong relationships with the customer teams there.

Qualifications

Required:

• Bachelor’s Degree or equivalent and at least 5 years of hands-on experience in designing, building and operating complex IT environments.

• Deep knowledge and experience deploying/configuring and maintaining: Active Directory, Group Policy, WSUS, MECM, Windows Desktop deployments and application installations.

• Experience with system and service management in high security domains.
• Azure Fundamentals (AZ-900) or any other equivalent Cloud Certification
• Proficiency in English (spoken and written) is essential for internal collaboration and reporting.

Desired:

• Deep experience in system and service administration of complex platforms.
• A passion for innovation in complex and constrained environments, to deliver advanced and progressive customer experiences.
• Experience working in broad domains including security, software, networking and service design.
• Extensive experience of service support, with on-call responsibilities. 
• Expertise experience in problem solving and analyzing distributed systems and critical production service environments.   
• Systems shell scripting experience (Bash, PowerShell, Python) and Dev Ops suites such as Ansible or equivalent.
• DevOps experience, including continuous configuration automation.
• Azure deployment knowledge including Bicep and Arm templates.

Security Clearance Requirements:

Candidates must be able to meet Microsoft, customer and/or government security screening requirements for this role. These requirements include, but are not limited to the following specialized security screenings: 

• Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud Background Check upon hire/transfer and every two years thereafter.
• Customer or government screening requirements as needed over time.

Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance with religious accommodations and/or a reasonable accommodation due to a disability during the application process, read more about requesting accommodations.

Key Job Accountabilities:

Engine/Product Production Support Repair

1) Tool Support (Primary Function)

• Design and develop repair fixtures/jigs/tools to support operational requirements, ensuring compliances with safety standards, dimensional tolerances and quality specifications.
• Coordinate with vendors/suppliers and end-users for fabrication and procurement of tools/equipment/consumables
• Perform tooling/consumable equivalency reviews
• Carry out First Article or support validation of new or modified fixtures/jigs/tools with repair engineers on repairs
• Lead or assist in investigation/root cause analysis and corrective/preventive actions for tooling failures/operational issues
• Participate in continuous improvement efforts, optimizing existing tool performances, durability or safety
• Maintain tool documentation, maintenance (i.e. CAD drawings, BOMs, tool maintenance requirements) and support audits with authorities
• Conduct feasibility studies and tool cost analysis for significant projects
• Perform 3D scanning, printing as part of tool design or prototype trials.

2) Production Support

• Perform measurements or establish programs using measurement systems (e.g. CMM, Optical Gaging Products, Optical 3D Metrology) to support operations
• Support programming in machining process (e.g. Conventional G-codes CNCs)
• Take charge of engineering documentation support functions

Required Experience and Qualifications:

• Degree/Diploma in Mechanical, Aerospace or Aeronautical Engineering
• Preferably 3 years working experience in Engines or Components Repair MRO Environment to be independently contributing
• Strong fundamentals in engineering drawing interpretations and GD&T
• Proficiency in mechanical engineering design skillsets (e.g. Autocad, Solidworks)
• Strong knowledge of tool material properties/heat treatment/surface coatings
• Proficiency in CNC programming, using measurement systems is an advantage
• Strong language, analytical, interpersonal and communication skills
• Computer literacy
• Understanding of repair processes is an added advantage
• Some understanding of aviation regulatory requirements is an advantage