Total 424 product engineer job vacancies in Art / Design / Entertainment category in Hong Kong

1.       Determined appropriate construction methods, materials, and quality standards by reviewing and coordinating structural design and shop drawings to ensure compliance with project specifications and relevant codes.

2.       Drafted, interpreted, and reviewed engineering drawings, technical specifications, and construction procedures to ensure accuracy, constructability, and adherence to design intent.

3.       Coordinated with consultants, contractors, and fabrication teams to resolve technical design issues and implement necessary drawing amendments.

4.       Prepared and submitted technical documentation, including design approval requests and revised drawings, ensuring proper document control and compliance with quality management systems.

5.       Monitored design modifications, assessed their impact on construction methodology and project progress, and facilitated necessary revisions to maintain alignment with approved designs.

6.       Reviewed and checked structural design calculations provided by consultants for temporary and permanent works, ensuring operation team can met design requirements and were suitable for safe execution.

7.       Established and maintained coordination between design and site teams to support effective execution of construction activities.

8.       Provided technical support to the construction team by addressing reinforcement and structural queries raised during inspections and site activities.

9.       Maintained updated records of structural components and construction progress to ensure accurate documentation and tracking of completed works.

Responsibilities:

• Research, design and develop lighting systems and modules for customised products or new products.
• Evaluate and develop design improvement, technical solution and cost reduction for existing products.
• Analyse manufacturing problems and recommend solutions.
• Perform and check engineering calculations and prototypes to verify product design and production methods.
• Source for and evaluate suppliers, components and products.
• Create, monitor and evaluate test programs to verify/validate product performance.
• Prepare calculations, schedules, reports, drawings and other related documentations and analysis.
• Create, check and maintain appropriate engineering documentations in support of a product design, in accordance with Company’s procedures.
• Provide sales, production, operations and project teams with technical and design support onsite and offsite.
• Track project status and coordinate for successful testing, commissioning and completion.
• Maintain library of research data, detailed methods, evaluation of components, materials, products and production methods.

Requirements:

• Bachelor Degree in Engineering (or similar based on experience).
• Minimum 5 years of relevant working experience.
• Portfolio of products designed and produced.
• Examples of solutions engineered.
• Proficiency in the use of Microsoft Office, AutoCAD 2D/3D and lighting calculation software.
• Experience in 3D printing.
• Experience in manufacturing processes and materials.
• Advanced analytical, critical thinking and decision-making skills.
• Interest in research, dive deep on subjects and able to self-learn.
• A keen eye for detail, organized, resourceful and independent.
• Team player with excellent written, pictorial and verbal communication skills.
• Good project management skills.
• Positive attitude and commitment to make a difference.

Benefits & Others:

• 5.5-day (alternate Saturday) work week.
• Training will be provided.

Job Description & Requirements

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

• Coordinate with client on design, construction and submission matters
• Prepare Geotechnical engineering designs/ analysis such as deep excavation, slope stability, tunneling, shallow and deep foundation, pipe jacking, ground improvement etc.
• Prepare Civil and Structural engineering designs such as box culvert, ECM, construction and traffic deck steel strutting
• Propose monitoring plan and monitor the performance of project
• Recognized degree in Civil / Structureal / Geotechnical Engineering.
• Fresh graduate is also welcomed to apply.
• Strong in structural and geotechnical principals and good knowledge of Design Codes.
• Conversant in numerical modelling and knowledgeable in Plaxis/Slope-W and/or ETABS, SAFE, STAAD Pro, TEDDS an advantage
• Familiar with all local authorities’ regulations and submissions
• Good Interpersonal & Communication Skills.

Interested candidates please email us your resume stating:

• Last drawn salary with breakdown if any
• Expected salary
• Notice Period / Availability

Responsibilities:

· Design and coordinate assigned Civil and Structural projects

· Perform structural analysis and design in building or on anystructures as required by the project

· Liaise with clients & consultants to meet C&Srequirements.

· Coordinate to ensure civil and structural requirements meetproject tender, submission and construction schedule

Requirements:

· Good degree in Civil and Structural Engineering from arecognized University

· Preferably 2-3 years working experience in Civil &Structural consultancy firm

· Conversant with structural programs such as STAAD, TEKLA, ETABS,RAPT would be advantages

· Ability to work independently

· Candidate without the relevant working experience but with goodacademic results may be considered

. We regret that this position is open to Singapore Citizens only due to hiring requirements.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Liaise with Estimating department and work together with them to develop an efficient and effective design for tender submission.
• To handle design tasks (tender scheme design and/or construction site designs) as assigned by the Design Manager.
• Liaise with project team - Follow with the project team to develop on efficient and cost effective design for construction works.
• Liase with the client / Engineer - Follow up and provide design justification together with the project team to obtain design approval.
• Any ad-hoc duties assigned by the Design Manager.

Company Overview

MSE Consultants Pte Ltd established in 1983, specializes in civil and structural engineering for diverse projects including flyovers, housing, hospitals, and high-end residential buildings. The firm partners with global experts to deliver excellent engineering consultation and management.

Job Summary

We are seeking a Design Engineer to design Good Class Bungalow (GCB).

Responsibilities

• Design civil and structural elements for Good Class Bungalow and landed house projects to meet client specifications and regulatory standards
• Prepare detailed engineering calculations, technical drawings, and submissions to secure project approvals from authorities
• Use AutoCAD and relevant design software to create accurate design documentation and plans
• Ensure all designs comply with Singapore’s building codes and regulations
• Manage project tasks independently, demonstrating responsibility and proactive problem-solving
• Apply strong IT skills to support design and documentation processes efficiently
• Demonstrate passion and commitment to delivering high-end residential house designs that meet client expectations

Preferred competencies and qualifications

• Experience working on bungalow or Good Class Bungalow projects, contributing to design and delivery excellence

Who We Are:

Hewlett Packard Enterprise is the global edge-to-cloud company advancing the way people live and work. We help companies connect, protect, analyze, and act on their data and applications wherever they live, from edge to cloud, so they can turn insights into outcomes at the speed required to thrive in today’s complex world. Our culture thrives on finding new and better ways to accelerate what’s next. We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs. We make bold moves, together, and are a force for good. If you are looking to stretch and grow your career our culture will embrace you. Open up opportunities with HPE.

Job Description:

Hewlett Packard Enterprise (HPE) is an industry leading technology company that enables customers to go further, faster. With the industry’s most comprehensive portfolio, spanning the cloud to the data center to workplace applications, our technology and services help customers around the world make IT more efficient, more productive and more secure.

HPE Aruba is one of the fastest growing businesses within HPE and offers opportunities to experience various leading-edge technologies such as Bring Your Own Device (BYOD), Cloud and Software-Defined Networking (SDN). One can grow his or her career in a variety of different verticals, all the way from the cutting-edge tablet business to high-end enterprise business. Here, employees productize and innovate to solve real world customer challenges.

We are currently looking for a dynamic, talented and innovative individual to be part of our high-speed digital circuit designers developing state-of-the art networking products. Explore your career options with HPE Aruba, together we will do something amazing.

Responsibilities
 

You will be:

• Responsible for end-to-end FPGA/PLD development, from digital logic design, detailed simulation, synthesis, validation and integration with hardware involving debugging and resolving systems issues.
• Derive specification based on product requirements.
• Develop Simulation and Hardware test environment, test plan and test cases based on FPGA and product specification. Require executing test cases, debug and resolve issues to meet full features in functional requirements.
• Collaborate with other technical contributors on system validation and integration testing with hardware.
• Research and enable innovative solutions for cutting edge designs, including filing patents and enabling next generation technologies.
• Be a team player, owning all aspects of assigned areas including verification.

Qualification

• Bachelor’s or Master’s Degree in Electrical Computer Engineering or equivalent.
• Minimum 4 years of hands-on experience with FPGA design, preferably with Verilog.
• Successfully completed complex designs from concept to production
• Experience with architecture definition, system integration of FPGA design and strong logic design fundamentals.
• Demonstrated ability to derive specification based on product requirements
• Experience in performing FPGA WCA (Worst Case Timing Analysis)
• Familiarity with common processor interfaces (PCI-Express, DDR5/4, I2C, SPI, RS232, MDIO, XAUI).
• Experience with Altera Quartus or Xilinx Vivado IDE including synthesis, simulation, place and route, timing closure.
• Experience developing directed tests for full chip test bench environments with Cadence IES, Questasim.
• Experience with system Verilog assertion is an advantage.
• Experience using Python, Java to do scripting is an advantage.
• Exposure to integration and debugging tools, such as oscilloscope and logic analyzers.
• Self-driven and able to work independently.
• Good communication and inter-personal skills to enable global and cross-functional engagements, plus ability to read, comprehend and explain engineering drawings and technical documents.

Job Responsibilities:

• Quality role to handle incoming and in process quality check and control. Govern the quality control with defined specification and update COA per specific customer requirement and specification.
• Triggering for MRB review if found non-conformity of product. Attend I-share meeting Ops and engineering
• Work with internal team for customer quality issue investigation, 8D and failure verification, setting standards for quality.
• Coordinate with internal team on Change Management and call biweekly meeting with team to review the overall change request. Prepare PCN report for notification to customer and align meeting with sales and CS on communication strategy.
• Review product specification and support for banned/restricted substance analysis and coordinate with third party.
• Support on in Process/Product Quality Audit, System and Customer audit
• Working with other staffs to establish procedures and quality standards and to measure against these targets for compliances. Determining, negotiate and agree on in house quality procedures, standards and specifications.
• Team member for PDP Gate3,4 and 5 and work with innovation team on the CTQ , specification and test method during PDP
• Coordinate with engineering team on SPC review and drive for Cpk improvement activities. Assist in internal statistical information, distribution and analysis. Knowledge of SPC and ability to use Minitab/JMP.
• Training to the quality control inspector and competency development
• Engage with inspection equipment vendor on PM, Calibration and carried out GRR
• Annual Capex and headcount planning to support operation

Job Requirement:

• Degree in Engineering/Material Science/Chemistry
• At least 3 years relevant experience is required
• ISO9001 quality management system
• Knowledge in SPC, Minitab/JMP, FMEA, and process mapping

Job Description

• Industry/ Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: West – Tuas (Nearest MRT: Gul Circle)
• Working Hours: 5 Days (Monday – Friday, 8:00 AM – 5:00 PM)
• Salary Package: Basic Salary + AWS + Transport Allowance + OT
• Duration: Permanent Role

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.
• Any ad hoc duties assigned

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Training is provided to inexperienced candidate

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #84843 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Essential Responsibilities:

Together with a team of engineers, to take on detailengineering task for water and wastewater treatment plants to fulfill business obligations, e.g., on-time delivery, satisfy contract specifications or industrial standards, and bring value to customers. Work shall include, but not be limited to, the following:

• Prepare P&IDs Drawing
• Prepare Fabrication Drawing
• Prepare Equipment Layout Drawing
• Prepare Pipe Routing Drawing -Prepare Equipment Modeling Drawing
• Perform material take off
• Liaison with the in-house design team on board to meet engineering deliverables.
• Perform value engineering to drive costs down.
• Support business initiative to bid and win jobs as required.
• Support the Project Management/ Construction Team on construction activities as required.
• Support the Commissioning Team on commissioning activities as required.

Qualifications/Requirements:

• At least 3 years of working experiences
• Highly motivated and able to work under pressure
• Familiar with Google Drive, Google Meet, MS SharePoint, MS Teams, and Navisworks
• Familiar with Autodesk Construction Cloud, AutoCAD, AutoCAD Plant 3D, and REVIT
• Ability to operate SolidWorks and SAP is a plus point

Brunel International S.E.A Pte. Ltd.

UEN No:199603098R

EA License No: 16S8067

JasonAustria - R1217761

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Design Engineer (Construction)
• Working Location: Tuas
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $4,500 + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Carry out detailed analysis and design of civil and structural parts for various projects
• Work with other teams to develop effective and practical design solutions
• Prepare technical drawings, reports, and specifications to support project work
• Ensure all designs follow relevant codes, regulations, and safety standards
• Provide support on site during construction and help solve any issues that arise

APPLY NOW!!!

• Bachelor’s degree in Civil or Structural Engineering, or relevant discipline
• 5 years of experience in specialist building works
• Skilled in engineering design software such as ETABS, SAP2000, SAADPRO, and AutoCAD
• Knowledge of Singapore’s structural codes and regulations

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #76727 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

THE ROLE:

The candidate is responsible for driving advanced device development, reliability engineering, and process integration to enable robust technology development and qualification. This position plays a critical role in supporting next-generation technology exploration through close collaboration with DTCO, design, and technology teams across global sites.

THE PERSON:

This role requires a candidate with a proactive mindset and the ability to work independently, while also demonstrating strong collaboration skills within a team-oriented environment.

KEY RESPONSIBILITIES:

• Drive advanced device development and process integration activities, leveraging deep understanding of semiconductor device physics and process optimization.
• Support technology development, qualification, and ramp, ensuring robust device performance and manufacturability.
• Lead or support reliability engineering efforts, including identification and analysis of key failure mechanisms.
• Develop and maintain design guidelines for TDDB, aging, and electromigration, translating foundry reliability rules into actionable design practices.
• Collaborate closely with DTCO, design, and technology teams to optimize design–process interactions.

PREFERRED EXPERIENCE:

• 10+ years of hands-on experience in semiconductor technology development, with strong background in: Device physics, Process optimization, Reliability engineering
• Proven experience in advanced CMOS technologies (e.g., FinFET, GAA, or equivalent advanced nodes).
• Solid understanding of device reliability fundamentals and process–device interactions.
• Demonstrated understanding and hands-on experience with SPICE simulation and related scripting or programming languages.

ACADEMIC CREDENTIALS:

• Educational Qualification: Master's degree required; Doctoral degree preferred.

• Field of Study: Degree in Electrical Engineering, Materials Science and Engineering, or a related field.
  

Responsibilities

• Design and develop mechanical and hydraulic systems based on industry standards, good engineering practices and contractual requirements
• Perform design/sizing/selection/integration of steel structures, mechanical & hydraulic components
• Design and produce mechanical and hydraulic system drawings/BOM and all associate project document such as operation and maintenance manual
• Carry out function testing/troubleshooting/commissioning in factory as well as in container terminals
• Provide engineering support/advice to Sales, After-Sales and Production department and conduct user training when required

Requirements

• Degree in Mechanical or Mechatronic Engineering
• Experience in design of machines, mechanism, components and hydraulic system, preferably in heavy industries such as cranes and construction equipment
• 3D CAD design experience and ability to conduct engineering calculation and analysis according to industry standard are essential
• Knowledge in steel fabrication and machining processes will be an advantage
• Experience in design set-ups, component selection, testing and troubleshooting preferred