Total 13,924 design engineer job vacancies in Hong Kong

As a Data Center AutoCAD Design Engineer, you will be responsible for designing, implementing, and maintaining our data center infrastructure to ensure optimal performance, reliability, and security. You will work closely with our engineering teams to help out our growing infrastructure needs and show your work through your command of your AutoCAD design experience.

Responsibilities:

● Design and create layouts of data center infrastructure including facilities structure, cabinets, overhead ladders and raceways, structured cabling, aisles (hot & cold), cabinets, mechanical, electrical, servers, storage, and networking equipment.

● Perform capacity planning and resource allocation to ensure the scalability and efficiency of our data center environment.

● Monitor and optimize the performance of data center infrastructure components to meet service level agreements (SLAs) and business requirements.

● Troubleshoot and resolve infrastructure-related issues, collaborating with cross- functional teams as needed.

● Implement and maintain security measures to protect data center assets and ensure compliance with industry standards and regulations.

● Plan and execute infrastructure upgrades and migrations with minimal impact on ongoing operations.

● Document configurations, processes, and procedures to ensure knowledge sharing and operational continuity.

● Stay abreast of the latest developments in data center technologies and best practices, recommending and implementing improvements as necessary.

● Utilize AutoCAD design experience to create detailed technical drawings and models for data center layouts and infrastructure components.

Requirements:

● Strong knowledge of data center architecture along with the minimum design requirements for a network, compute, and storage racks as well as layers 2/3 and virtualization platforms

● Proven experience in a colocation, inside plant, or telecommunications facilities engineer or similar role in a large-scale data center or telecom environment.

● Solid understanding of physical design standards and IT security best practices in data centers and colocation facilities.

● Strong understanding of public cloud infrastructure as well as cloud-native applications, preferably with demonstrable experience in helping scale the overall global footprint of a geographically diverse production network

● Excellent troubleshooting skills with the ability to analyze complex issues and implement effective solutions.

● Strong communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams.

● Relevant certifications (e.g., CCNA, MCSE, VCP, Autodesk Certified Professional) would be a plus.

● Proficiency in AutoCAD or similar software for designing data center layouts and infrastructure components.

Key Responsibilities

• Conceptualize, design, and develop automation equipment and mechanical systems for cleanroom and industrial applications.
• Prepare engineering design, detailed drawings, and project cost estimation.
• Manage projects from concept stage to manufacturing and final commissioning.
• Work closely with cross-functional teams to implement design improvements and cost optimization for existing platforms.
• Provide technical solutions and troubleshooting for design issues during project execution.
• Review and verify engineering drawings and designs to ensure technical accuracy and compliance with customer requirements.
• Liaise with customers on technical specifications, design reviews, and product requirements.
• Lead machine installation, testing, and commissioning at customer sites when required.
• Ensure designs comply with relevant engineering standards (ISO9000, SEMI-S2, SOP39)

Requirements

• Diploma or Bachelor's Degree in Mechanical Engineering or related field.
• Minimum 5 years of experience in mechanical design, preferably in automation equipment, semiconductor, HDD, or precision engineering industries.
• Proficiency in SolidWorks and AutoCAD is mandatory.
• Experience in pneumatic system design and pneumatic circuit diagram preparation is required.
• Knowledge of linear motion systems
• Strong experience in preparing fabrication drawings, assembly drawings, and machine layout drawings.
• Strong problem-solving ability with a practical engineering mindset.
• Self-motivated, organized, and able to work in a fast-paced project environment.
• Good communication skills in English.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

• Produce detail drawings and specifications for construction.
• With great ideas, innovative and extensive design skills.
• Understand the construction process and prioritize the procedures at various stages.
• Able to work out Bill of Quantities and quotation.
• Able to speak fluently and email in both English and Chinese.
• At least 5 years of experience working in Singapore.
• Malaysian are welcome

Please send resume to dnd@divinendynamic.com

Evaluates project information, confers and corresponds with client representatives in coordination with the
Project Manager/Principal to determine project parameters and requirements.
Develops design concepts for project(s).

- Leads design development of client’s interior program through development of photographic image studies.

- Develops interior design to meet the client’s programmatic requirements and assure technical suitability.

- Develops conceptual ideas graphically.

- Leads design charettes.

Participates directly in each project from programming through project completion.

Leads presentation and design drawings.
Be the creative head.

- Develops block plans and bubble diagrams.

- Leads and reviews design details.

- Corrects / revises drawings with minimal supervision.

Coordinates with design team to ensure integration of design and interior design elements.

- Provides guidance to other members of the design team to ensure that design documents are in appropriate formats.

- Participates in all charettes.

- Monitors and sometimes coordinates the design work of consultants.

Is responsible for quality control for the interior design function, including:

- Accuracy of each segment of work as it is completed.

- Conformance to company design standards.

Project Management

- Establishes program with Project Manager/Principal.

- Responsible for all projects within the team.

- Participates in determining the skills required of other team members for the project and the selection of those team members.

- Prepares progress reports. Alerts Project Manager to any changes in scope, lack of information or decisions from client.

Oversees interior design aspects of construction:

- Assists with construction oversight for general conformance with the interior design concept.

- Responds to construction questions as they relate to interior design issues.

Directs / supervises the gathering of the technical specifications for various interior design elements (FF&E).

- Selects and directs materials for project.

Confers and corresponds with client representatives, to determine project parameters / requirements; participates in design presentations.

Directs construction of finish boards.

Participates in the development of “in-house” design standards; assures that design policies, procedures, standards and philosophies are adhered to.

Responsible for personal and staff development

- Performs senior staff development duties such as mentoring, training, supervising and directing junior staff.

- Participates in management and leadership groups.

Job Responsibilities:

Hyperscale Server Design Engineer is responsible for designing, validating, and optimizing high-performance server hardware, racks, and infrastructure systems to support massive-scale cloud computing environments. Responsibilities include:

• Conduct server feasibility studies, define and maintain hardware architectures and solutions, and create execution plan.

• Design schematic, create BOM, support prototype/engineering build.

• Guide and work with PCB engineers on layout and placement.

• Design, deploy, and operate large-scale GPU-based compute environments, including optimizing network topologies like InfiniBand and Ethernet.

• Lead server validation and bringing up complex systems, including lab validation, SI/PI (Signal Integrity/Power Integrity) analysis, and debugging.

• Partner with software, datacenter engineering, mechanical and thermal, and vendor teams to ensure seamless hardware/software integration. Drive root cause analysis and corrective actions.

• Apply advanced knowledge of server energy efficiency and power redundancy to optimize for performance and cost.

• Work with manufacturing teams to resolve issues and to support NPI and production builds.

• Provide technical expertise and consultation to peers.

• Maintain consistent high quality of engineering design work to develop robust, high performance and cost effective designs and products.
  

Job Requirements:

• Degree/Master in Electrical/Electronic/Computer Engineering or equivalent

• Minimum of 5-10 years of experience in computer architecture, server design or hardware validation.

• Strong design experience and knowledge in any of the following:

  • Knowledge of GPU/CPU architectures, high-speed interfaces (QSFP-DD/OSFP) and memory interfaces such as DDRx DRAM, NAND/NOR/SPI Flash.

  • High speed interfaces including PCIe, NVLink, GbE, SAS, USB.

  • BMC implementations.

  • High DC voltage power designs and distribution, and thermal management.

  • High-speed Ethernet networking.

  • Experience with liquid cooling is an advantage.

• Understanding integration of software and hardware.

• NPI project execution experience and familiarity with Product Development Life Cycle will be desirable.

• Experience using CAD tools (e.g. Cadence Allegro, Mentor PAD).

• Experience with SI/PI simulation (e.g. ANSYS HFSS/SIWave) and lab equipment like high-speed oscilloscopes and VNAs are added advantage.

• Familiar with ISO9001.

• Troubleshooting skills in high-speed signaling, thermal or power delivery.

• Self motivated and willing to learn new technology and skills who works well under pressure.

• Excellent oral and written communication skills.

Our esteemed client in the Engineering Consulting industry is seeking a Civil/ Structural Engineer to join their dynamic team:

• Employment Type: Permanent
• Position: Civil/ Structural Engineer
• Location: Jurong East
• Working Hours: Monday to Friday, Office Hours
• Salary Package: Up to $4,200 + Bonus

Job Responsibilities:

• Create detailed 2D/3D models and engineering drawings.
• Prepare engineering documentation.
• Conduct feasibility assessments and technical evaluations.
• Perform research aligned with organizational objectives.
• Manage project timelines and coordinate execution.
• Ensure compliance with current industry standards and regulations.
• Perform on-site inspections as needed.
• Coordinate with multiple parties to address design and implementation challenges.
• Participate in professional development programs prepared by the company.
• Conduct technical research and support collaborative R&D initiatives.

Job Requirements:

• At least a Bachelor of Civil Engineering, Architecture, or other related discipline with minimum 1 year of similar working experience.
• Inexperienced candidates are welcome to apply as training will be provided.
• Experience in project management would be advantageous.
• Willing to travel as and when needed.
• Proficient in Microsoft Office.
• Familiar with CAD and other engineering design software.
• Having a Class 3 Driving License would be a plus.

Ready to apply? Here’s how:

• Click the APPLY button, or
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing.

Only shortlisted candidates will be notified.

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA).

Adelin Chong | EA Personnel Reg No.: R1875641

Intuit Recruitment Pte Ltd | EA License No.: 25C2793

As a NAND Reliability Product  Engineer, you will be responsible for defining, evaluating, and safeguarding the Extrinsic/Intrinsic reliability of Micron’s NAND Flash products. You will work hands‑on with large‑scale data analysis, electrical failure analysis, and cross‑functional teams to ensure robust product reliability and prevent escapes to customers.

This role offers deep technical ownership at the intersection of device physics, circuits, process technology, and product engineering, with strong visibility across development and manufacturing organizations.

Key Responsibilities

• Define and implement NAND Flash reliability test flows to assess product reliability performance and prevent extrinsic/intrinsic reliability escapes.

• Perform high‑volume statistical data analysis to evaluate NAND DPM/ intrinsic reliability risks and trends.

• Drive electrical failure analysis, including  advance characterization, to identify root causes and solution spaces.

• Develop short‑term countermeasures such as targeted stresses and screens, applying knowledge of digital/analog circuits, device physics, and process engineering.

• Qualify the product with innovative control measures to provide best in Class DPM and Cell reliability.

• Collaborate closely with Fab, NAND Technology, NAND Design, Product Development, System Development, and Quality/Reliability teams to develop solutions and enable shipment of high‑quality end products.

• Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements.

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work.

• Ability to apply baseline digital fluency and role‑appropriate AI literacy to use AI‑enabled tools responsibly and effectively for research, analysis, content creation, problem‑solving, operational tasks, and achieving business outcomes.

• Support customer inquiries and provide technical insights related to product reliability.

• Drive strategic initiatives to enhance the overall reliability program and influence the direction of future product development.

Qualifications And Skills:

• Bachelor’s degree  or Master’s degree  with of relevant experience in Electrical Engineering or related field

• Knowledge in Semiconductor Reliability, NAND Technology, and Electrical Failure Analysis.

• Understanding in Design, Device Physics, Circuits,  Process.

• Strong statistical analysis, communication, and problem‑solving skills.

• Experience with application of AI tools, LLMs ,  data analysis tools (e.g., Python, JMP, Tableau).

• Strong analytical and problem‑solving skills.

• Team player and self driver.

Why Micron

Micron is a global leader in memory and storage technology, delivering HBM,DRAM, NAND,  and NOR solutions that power the world’s data‑driven AI innovation. At Micron, you’ll work on technology that matters—alongside teams that value ownership, learning, and technical excellence.

Manages production support engineering for a specific product or group of products after transfer from design to high volume production. Interfaces with design, process, test and reliability engineering to solve problems. Sustains products with cost reduction and yield improvements.

Key Responsibilities Key Responsibilities

RTL Design and Verification

• Develop synthesizable RTL in Verilog/SystemVerilog for custom on-chip test, monitoring, and diagnostic IP targeting analog and mixed-signal failure detection.
• Design and verify digital logic blocks such as test controllers, sequencing logic, sensor/interface control logic, measurement and monitoring logic, data capture and comparison logic, and failure detection and reporting logic.
• Build clean register and bus-connected interfaces, for example APB, AHB, or AXI-lite based control and status paths, to enable firmware interaction and subsystem integration.
• Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
• Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
• Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths.
• Debug RTL and simulation issues through waveform analysis, assertion-based checks, root-cause investigation, and close interaction with integration and product teams.
• Ensure the RTL is modular, reusable, timing-aware, synthesis-friendly, and scalable for integration across multiple SoC derivatives.

SoC Integration

• Integrate custom DFT / diagnostic IP into SoC subsystems and system-level test architecture with proper consideration for clock/reset structure, interrupt handling, and status visibility.
• Work closely with SoC integration and DFT teams to ensure compatibility with system test infrastructure, production test flows, diagnostic mechanisms, and firmware control requirements.
• Support integration readiness by addressing CDC, reset interactions, timing considerations, low-power implications, and implementation handoff requirements.

Cross-Functional Collaboration

• Work closely with digital, analog, and mixed-signal design teams, DFT engineers, SoC architects, and product/test engineering teams throughout the design and validation cycle.
• Translate analog or mixed-signal failure modes into robust digital detection logic suitable for on-chip test, screening, and diagnosis.
• Contribute to technical discussions on architecture tradeoffs, observability strategy, and practical silicon debug readiness.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field, with 5–7 years of relevant experience.
• Strong hands-on experience in RTL design using Verilog/SystemVerilog.
• Practical experience in RTL verification, simulation, and debugging methodologies.
• Solid understanding of ASIC / SoC design flow including coding, simulation, synthesis, and integration.
• Good foundation in digital design concepts such as FSM design, datapath design, bus protocols (AXI/AHB/APB), clock-domain handling, reset strategy, and timing considerations.
• Experience working in complex SoC environments with cross-functional teams.

Preferred Qualifications

• Experience developing control, monitoring, or diagnostic IP associated with analog or mixed-signal subsystems.
• Exposure to behavioral modeling or interface definition for analog and mixed-signal verification use cases.
• Familiarity with subsystem-level integration, production screening considerations, and silicon debug support.
• Working knowledge of scripting or automation for verification, regression, or design productivity is an advantage.

Description:

• You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

• Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog
• Experience in ARM or RISC-V processor system
• Experience in embedded C and assembly code programming
• Experience in analysis of power, timing and area
• Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)
• Disciplined, quality-minded, and highly driven for excellence
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience
• Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus
• Experience in system modelling and simulation using emulator and SystemC is a plus
• Experience in UVM verification methodology is a plus
• Passionate and strong in general programming is a plus

Responsibilities

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 5+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
5. Experience in synthesis, with analysis of power, timing and area.
6. Disciplined, quality-minded, and highly driven for excellence.
7. Excellent team player and good communication skills.
8. MSEE/BSEE in Electrical Engineering or Computer Engineering.
9. Understanding of convolution operator and number system is required.
10. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
11. Experience in UVM verification methodology is a plus.
12. A plus to have SoC design experience.
13. Experience with optimizing micro-architectures for low-power and low-area is a plus.
14. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
15. Experience with past design experience with NPU / GPU / DSP design is a plus.
16. Experience with ARM or RISC-V processor systems is a plus.
17. Passionate and strong in general programming is a plus.

5 days, 8.30am-6.15pm

Salary: $3500- $6000

Location: Ubi 

Company background:

Specializes in Semiconductor Backend Tooling including Die Attach Tools, Wire Bond Tools & Bond Test Tools

Job Responsibilities:

• Design and development of Semiconductor Tools and mechanical systems.
• Planning, Scheduling and Costing of Tools and Mechanical Modules
• Responsible for 3D & 2D drawings, tolerance analysis, BOM preparation.
• Working closely with Electrical, Vision and Software Engineers.
• Willing to work extended hours in critical phases of project execution.

Job Requirements:

• Diploma or Degree in Mechanical Engineering or related Technical disciplines.
• Minimum 3 years of design experiences in semiconductor tooling
• Experience with Design and Development of High-Speed Pick and Place Systems, Flip Chip Bonders, Die Attach Machines, and Lamination Machine is a definite plus
• Proficiency with CAD Software is a must.
• Experience with vision application, thermal modelling, calculation and measurement techniques would be an advantage.

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

The Product Design Engineering Technologist develops robust head-media interfaces for magnetic recording media, which will be integrated into Western Digital's hard disk drive products. This critical role involves collaborating with R&D and worldwide teams to innovate and productize recording media designs. This role requires strong technical expertise and the ability to manage complex manufacturing systems while ensuring defect mitigation, quality assurance, and reliability standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop head-media interface designs that meet product performance requirements and scale into high-volume manufacturing environments.
• Improve hard disk sputtering processes to reduce defects and enhance manufacturing yield.
• Optimize magnetic areal density by reducing head-media spacing while maintaining reliability specifications and performance standards.
• Conduct comprehensive testing and validation of recording media designs to ensure compliance with product specifications and industry standards.
• Collaborate with cross-functional teams including manufacturing, quality assurance, and product engineering to drive innovation and process improvements.
• Analyze manufacturing data and performance metrics to identify optimization opportunities and implement corrective actions.
• Document technical findings, design specifications, and process improvements through detailed reports and presentations.
• Support the transition of new designs from development to production, ensuring manufacturability and cost-effectiveness.

Summary

• Basic $2500-$2800
• Mon-Fri, Office Hour
• AWS+Bonus
• Location:Pioneer

Responsibilities

• Source and negotiate with suppliers and contractors for competitive pricing and timely delivery.
• Prepare and process Purchase Orders (POs) accurately and efficiently.
• Monitor inventory levels and purchase materials as required.
• Obtain and compare quotations to ensure cost-effective procurement.
• Coordinate with project teams, suppliers, and contractors on material orders and deliveries.
• Maintain accurate procurement records, supplier information, and PO documentation.
• Resolve purchasing issues, including order discrepancies and delivery delays.
• Attend project meetings and support ad-hoc administrative and procurement duties.

Requirements

• Candidate with diploma in interior design/construction related study are welcome to apply.
• Candidates with internship experience in purchasing construction materials are welcome to apply.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Lee Zi Qing (R25126986)

EA License No: 20C0358

Responsibilities

• Assist in Conceptualising and Designing: Work on a variety of visual design projects, from brainstorming to execution.

• Craft Presentation Decks: Build aesthetically pleasing and persuasive decks that effectively communicate ideas, and present them to internal stakeholders.

• Collaborate with Professionals: Assist and work alongside graphic and 3D designers, learning from experienced colleagues.

• Take the Lead: As you develop your skills, you'll have the opportunity to lead your own projects with guidance.

• Engage in Diverse Projects: Be part of exciting initiatives, including exhibitions, themed experiences, fit-outs, and more, to challenge your creativity.

Requirements

• Software Skills: Proficiency in design tools within Adobe Creative Cloud (e.g., Photoshop, Illustrator, InDesign).

• Design Talent: A strong eye for detail, solid design instincts, and the ability to translate ideas into compelling visuals.

• Interpersonal Skills: Effective collaboration and communication abilities to work seamlessly with team members and stakeholders.

• Trend Awareness: Keep up with the latest design trends and innovations to bring fresh ideas to projects.

Marketing & Digital Design Intern (3-6 month internship)

JOIN US!

We are offering a 3–6 months Marketing & Digital Design Internship.

We are a small but strong, collaborative team working across engineering and consulting businesses, and we are looking for someone who wants to grow in a fast-moving, hands-on environment where creativity and ownership matter.

Earliest start date: 15 July 2026

Role Overview

This role is primarily focused on digital marketing execution, content creation, and lightweight design production, with additional support in basic operational and coordination tasks.

Your day-to-day work will center on:

• Social media content creation and management
• Simple graphic design and visual production
• Basic marketing execution support across digital channels
• Light operational/coordination work (documentation, internal communication, scheduling support)

Key Responsibilities

• Create and publish visual content across marketing channels (Instagram, LinkedIn, email campaigns, website, etc.)
• Support marketing initiatives through design assets and content production
• Assist in maintaining content calendars and ensuring timely publishing
• Contribute to brainstorming sessions and campaign ideation
• Prepare graphics for both digital and print use
• Conduct basic research on competitors, trends, and audience behavior
• Monitor social media engagement and assist in simple performance reporting
• Maintain brand consistency across all platforms and materials
• Organize and manage digital design files and assets
• Support internal coordination and documentation tasks when required

Requirements

We are looking for someone who is practical, fast-learning, and comfortable working in a hands-on environment.

Must-have:

• Proficiency in Canva / similar design tools (required)
• Experience with social media content creation or posting (Instagram & thread preferred)
• Strong attention to detail, layout sense, and visual consistency
• Comfortable communicating in English (email, meetings, WhatsApp)
• Responsible, self-driven, and able to work independently
• Owns a personal laptop

Good to have:

• Basic skills in Photoshop / Illustrator / InDesign
• Basic video editing (e.g., CapCut, Premiere Pro)
• Familiarity with simple website editing tools (e.g., Wix, Imweb)
• Interest in branding, UX/UI, or digital marketing
• Experience managing social media accounts or content calendars

Bonus Points

• Good at documentation, organization, and communication
• Portfolio showing a variety of design styles (academic, personal, or freelance work is acceptable)
• Ability to adapt quickly in a fast-paced environment

Why Join Us

We are building a team that values:

• Creativity with responsibility
• Fast execution and real-world exposure
• Collaboration over hierarchy
• Long-term growth and trust-based relationships

If you are looking to develop your skills in real digital marketing and design operations, and want to be part of a company where your work is actually used and seen, we would like to hear from you.

About Us

• 2KBROS Engineering: 2KBROS Engineering
• 2KBROS Consulting: 2KBROS Consulting

Internship Details

• Duration: 3–6 months (extension possible upon mutual agreement)
• Working Days: Monday – Friday (5 days/week)
• Office Hours: 09:00 AM – 06:00 PM
• Location: 20 Upper Circular Rd #01-09, The Riverwalk, Singapore 058416

How to Apply

Please email the following:

• Resume (please include expected salary and current visa status)
• Portfolio (design or marketing work if available)