Total 17,950 Full-time construction engineer job vacancies in Australia

Job Description:

• Analyse SPC chart. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyse split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on pass down to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Manufacturing can have more flexibility.
• Perform process matching between equipment to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self-audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics /Microelectronics / Chemical Process Engineering / Chemistry / Physics related major
• Min 2 years working experience in Diffusion (implant, Furnace and WET/Clean Tech) Process.
• Good interpersonal skills and is an excellent team player
• Logical thinking capability and good analytical skill
• Highly level of integrity with good ownership and accountability
• Passion for the semiconductor / manufacturing industry

about the company

Our client is one of the leading system integrator for M&E MRT project

about the job

• Conceptualize and develop a targeted master program.
• Work on the progress forecast and prepare the rolling program.
• Liaise with engineers from different trades and subcontractors in weekly/monthly progress report preparation.
• Monitor the project progress and advise the project team on clashes, interfaces, constraints, potential delay and risks
• Update, track and report project progress against planned schedule and status of critical path.
• Evaluate project delays by monitoring actual progress effectively.
• Work with the project team to come out catch-up quantities and program when applicable.
• Perform delay analysis to demonstrate required EOT; keep proper records of all the documents required for EOT and variations claims.
• Update master program based on the update information such as granted EOT.
• Prepare EOT submission to clients and consultants.
• Able to incorporate costs and resources planning including manpower, machinery and materials into the master program.

skills & experience required

• Degree/Diploma in engineering
• Well versed in Primavera P6
• Minimum 4 years of relevant MRT M&E project experience
• Able to commence immediately or within short notice period

If you are interested in the position, kindly send your CVs to yitwei.kwan@randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

(EA: 94C3609 / Reg: R1332558)

- MORE THAN 10 YEARS EXPERIENCE
- UNDERSTAND COMMERCIAL RESTAURANT RENOVATION WORK
- UNDERSTAND M&E WORKS MECHANICAL AND ELECTRICAL
- UNDERSTAND EXHAUST DUCTING AND VENTILATION WORKS
- CLASS 3 LICENSE
- ABLE TO USE COMPUTER
- ABLE TO ATTEND MEETING
- ABLE TO PLAN SCHEDULE, WORK AND MANAGE TEAM OF WORKERS
- ABLE TO SETTLE OPERATIONS WORKFLOW

Job Description

We are seeking an experienced and motivated Construction Supervisor to oversee daily site operations and ensure construction activities are completed safely, efficiently, and according to project specifications.

Key Responsibilities

• Supervise and coordinate daily construction site activities.
• Monitor work progress and ensure projects are completed on schedule.
• Ensure compliance with workplace safety regulations and company policies.
• Coordinate with project managers, subcontractors, suppliers, and workers.
• Conduct site inspections and resolve technical or operational issues.
• Maintain site records, reports, and documentation.
• Ensure quality standards are met throughout the project lifecycle.
• Manage manpower deployment and resource allocation.

Requirements

• Diploma or Degree in Construction Management, Civil Engineering, Building, or related field.
• Minimum 2–5 years of construction site supervision experience.
• Knowledge of Singapore construction regulations and safety requirements.
• Strong leadership, communication, and problem-solving skills.
• Ability to work independently and manage multiple site activities.
• BCSS, CSOC, or other relevant construction certifications will be an advantage.

Benefits

• Competitive salary package: SGD 3,500 – SGD 7,000.
• Career advancement opportunities.
• Training and professional development.
• Performance-based incentives.

Supervise day-to-day renovation and interior fit-out works on site

Coordinate and oversee subcontractors including carpentry, electrical, plumbing, and painting works

Ensure works are carried out according to approved drawings and site requirements

Monitor work progress and report site updates to project manager

Carry out basic site checks to ensure workmanship quality meets company standards

Assist in resolving basic site issues and coordinate rectification works when required

Ensure site is kept safe and follows basic Workplace Safety and Health (WSH) requirements

Assist in receiving and checking construction materials delivered to site

Job Requirements

Minimum 5 years of experience in renovation / interior fit-out / construction works

Experience in supervising small to medium renovation sites preferred

Able to understand construction drawings and instructions

Familiar with carpentry, partition, ceiling, or M&E coordination work is an advantage

Able to work with subcontractors and coordinate site activities

Willing to work in construction site environment

Basic communication skills in English (Mandarin speaking is an advantage)

Responsible, hardworking, and able to follow instructions

Optional Requirements (if needed for listing enhancement)

Prior experience in Singapore construction or renovation industry preferred

Able to work under tight deadlines and multiple site conditions

Team player with good on-site coordination skills

Role:
Site Engineer (Construction / C&S)

• Singapore Based (Project site: Future Project, Office at City Hall)

• 5 Days work per week (8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT))

• Salary: $3800 to $5400

• Bachelor's Degree in Civil & Structure Engineering + relevant experience

• Career Progression Opportunities

Roles & Responsibilities

To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.

To attend to project / technical meeting and resolve site issues with owner / consultants in order for the site progress to proceed smoothly.

To verify the work done on site are in accordance to the approved drawings / specifications / authority’s requirement and also ensured that the subcontractor carry out rectification for non-compliance.

To resolve site issues with consultants / subcontractor / supplier ASAP in order to minimise delay to the construction progress.

To ensure that the related documentations are updated and ready for ISO audit.

To cooperate with the safety department and carry out the assigned duties within the safety framework.

Assist site management team in project Planning & coordination.

Arrange and prepare documents for authorities’ submission for Conquas, RI, TOP etc.

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

Roles & Responsibilities

• Plans and lays out work from blueprints, drawings, models, or verbal instructions using a variety of carpenter's hand tools, portable power tools, and standard measuring instruments, makes standard shop computations relating to dimensions of work, and selects materials necessary for the work
• Ensures and delivers an adequate supply of tools, equipment, and materials needed to complete jobs are at work sites as required
• Uses hand and power tools to measure, cut, and shape wood, drywall, and related materials to specification
• Uses hand and power tools to fabricate, install and repair solid surface materials (countertops, partitions and wall surfaces)
• Joins materials with nails, screws, staples, or adhesives
• Ensures adequate supplies of tools, equipment, and materials needed to complete jobs are at work sites as required
• Repairs and perform minor furniture repair

ACMV Engineer (Air Conditioning and Mechanical Ventilation Engineer)

• Working Days: Monday – Friday

• Working Hours: 9am – 5.30pm

• Salary: $ 3,800 - $ 5,000

• Working Location: Eunos

• Industry: Interior Design & Construction Company

• Diploma in Engineering-related experience (Mechanical, Electrical or construction services preferred)

• 2+ years of relevant work experience

• Familiarity with local regulations and standards preferred 

Interested applicants can also send your resume to (Liwenpoh741#gmail.com) and allow our consultant to match you with our clients. No Charges will be incurred by Candidates for any service rendered.

WA ME 97354019 for more ACMV Engineer role

Job Responsibilities:

• Design and planning of ACMV and MV systems

• Preparing and submitting tenders (Tender Costing)

• Conducting site surveys and managing the construction site (Site Management)

• Familiar with and arranging ACMV related services

• Assisting in the procurement of engineering equipment and materials (Procurement)

• Supervising on-site installation work to ensure compliance with drawings and specifications

• Assisting in testing and commissioning (T & C) Commissioning) Assisting with system troubleshooting and problem solving

POH LI WEN REG NO: R25136683

THE SUPREMEHR ADVISORY PTE LTD EA NO: 14C7279

Basic Qualification/ Skill required

Minimum - ITE (Electronic ) and skill is the most important qualification.

These are the scope of work if you have no experience and are willing to learn.

Will be performing initial testing, analysis and repair of PCB, and other electro-mechanical assembly.

Responsibility

1. Maintain documentation of parts condition upon arrival, during repair as well as final testing prior to shipping out repaired parts.

2. Repair populated PCB which include but not limited to digital board, analog board, RF,etc.

1. Familiar and proficient with different soldering and desoldering technique (Through hole component, smd, bga).

2. Must be familiar with at least one of the following and able to recognize main building block of : SMPS power supply, Servo amp, stepper motor driver, linear power supply.

3. Able to use oscilloscope to troubleshoot parts, power supply to provide power to board under repair, soldering, station, desoldering station, multimeter.

4. Advance skill that will be a plus point.

5.Knowledge of servo motor, encoder and servo amplifier (Sanyo)

6. Programming skill (C, python, basic, other language).

7. Arduino, Raspberry pi, or any other micro controller and sbc.

8. Understanding of reverse engineering technique as well as ability to reverse engineer a PCB, repairing without schematic availability.

Salary will be commensurate with skill and experience

5 days' work week

About the Role

As a Senior Application Engineer / Application Engineer, you will provide technical expertise and application support, collaborating with customers and partners to deliver practical engineering solutions and drive Industry 4.0 initiatives from concept to commissioning.

Responsibilities

Technical Solutions & Application Engineering

• Develop and propose technical solutions tailored to customer requirements to address operational challenges
• Conduct feasibility studies and application assessments to validate solution viability
• Provide technical consultation and ongoing support to customers and internal teams for effective solution deployment
• Design and develop application solutions that deliver measurable value to customers
• Deliver proof-of-concept demonstrations to secure project opportunities and build customer confidence

Project Management & Implementation

• Manage engineering projects from initial planning through successful completion, ensuring alignment with customer needs
• Coordinate activities with system integrators, contractors, and project stakeholders to maintain project momentum
• Conduct testing, commissioning, acceptance testing, and system buy-offs to ensure quality and compliance
• Ensure projects are delivered on schedule and meet defined customer requirements
• Prepare and maintain comprehensive project documentation and technical reports for transparency and knowledge sharing

Product Development & Technical Support

• Perform product testing and troubleshoot technical issues to maintain product reliability
• Investigate technical problems and conduct root cause analysis to identify corrective actions
• Recommend and implement corrective and preventive measures to improve product performance
• Support warranty claims and product quality investigations to uphold customer satisfaction
• Provide technical feedback to manufacturers and principals to influence product improvements

Customer Engagement & Business Development

• Analyze customer operational challenges and anticipate future needs to tailor solutions
• Deliver technical presentations and product demonstrations to educate and engage customers
• Support sales teams by providing technical materials and application expertise to enhance sales effectiveness
• Gather market intelligence on competitors, industry trends, and emerging technologies to inform strategy
• Contribute to business growth by developing innovative solutions and fostering strong customer relationships

Training & Knowledge Sharing

• Conduct product and system training sessions for customers and internal stakeholders to build technical competence
• Share technical knowledge and best practices across teams to enhance collective expertise
• Mentor junior engineers and provide on-the-job guidance to support professional development

Requirements

Qualifications

• Minimum Diploma in Electrical Engineering, Electronics Engineering, Mechatronics Engineering, Automation Engineering, or related disciplines.
• Fresh graduates are welcome to apply for Application Engineer positions.
• Candidates with 5 years or more relevant experience may be considered for Senior Engineer positions.

Technical Skills Competencies

• Knowledge of industrial control systems, automation technologies, and circuit analysis to support solution design
• Understanding of PLC programming and industrial communication systems for system integration
• Familiarity with Industry 4.0 technologies, IoT, AI, Cybersecurity, and Smart Manufacturing solutions to drive innovation
• Experience in system integration, troubleshooting, testing, and commissioning to ensure successful project delivery
• Ability to interpret technical specifications and customer requirements to develop effective solutions
• Involvement in implementing sustainability practices aligned with corporate sustainability strategy
• Programming knowledge in IEC61131 standards (LD, ST, FB, SFC) to enhance automation programming capabilities
• Experience in industrial automation projects and system integration to support complex implementations
• Technical presentation and customer engagement skills to effectively communicate solutions
• Risk management and project coordination experience to mitigate project risks and ensure smooth execution

Soft Skills Competencies

• Self-motivated and results-oriented.
• Innovative, creative, and proactive.
• Strong teamwork and collaboration skills.
• Excellent communication and interpersonal skills.
• Customer-focused mindset with strong business acumen.
• Ability to work under pressure and manage multiple priorities.
• Strong analytical and problem-solving abilities to resolve technical challenges

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Job Description:

• Manage construction activities to make sure that compliance with cost, time, contract specification, health and safety, quality and environmental requirements are achieved; manage the development and implementation of programmes associated with project plans.
• Oversee and direct construction projects from conception to completion.
• Participate in the evaluation of the suitability of subcontractors.
• Review the project in-depth to schedule deliverables and estimate costs.
• Liaise with subcontractors and other service providers in relation to programmes and workmanship.
• Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations.
• Coordinate and direct construction workers and subcontractors.
• Ensure quality construction standards and the use of proper construction techniques.
• Liaise with the safety personnel to undertake risk assessment and develop suitable control methods.

REQUIREMENTS (QUALIFICATION & EXPERIENCE)

• Minimum 12 years of engineering experience with Degree in Civil Engineering recognized by the PE Board or qualification acceptable to Commissioner of Building Control as eligible for application as Resident Engineer or Recognized Degree in relevant field subject to the acceptance of the Engineer
• At least 10 years of experience in managing construction teams for projects of similar scale and complexity.
• The construction managers shall be full time at site until completion of whole works.

• Perform all types of carpentry work related to commercial office construction, including partition works, ceiling framing, door and window installation, and built-in furniture.
• Read and interpret drawings and specifications to determine layout, materials, and dimensions.
• Measure, cut, shape, and assemble wood, plywood, and other materials according to design requirements.
• Install office fittings, cabinetry, skirting, wall panels, feature walls, and other interior finishing works.
• Ensure all work is completed according to safety standards, quality requirements, and project timelines.
• Collaborate with project managers, designers, and other trades to ensure smooth coordination of site activities.
• Perform maintenance, repair, and adjustment of existing carpentry installations when required.
• Maintain a clean and organized work area and proper handling of tools and materials.

Legal Counsel

Work Location: Changi site office
Working days: 5 days 8am to 5pm
Salary: $12k to $15k (depends on experience)

Requirements

• Possess at least Bachelor’s Degree in Law (LLB) from a recognized university
• Minimum 10 years of relevant legal experience in a law firm and/or in-house (preferably in the construction industry)
• Deep knowledge and understanding of construction laws, regulations, and compliance frameworks in Singapore

Job Description

• Ensure the legal integrity of contracts to protect the company's interests and prevent potential legal issues.
• Advise on the appropriate legal structures for project entities (e.g., joint ventures, SPVs) and ensure their compliance with local and international laws.
• Address international legal considerations, including trade laws, export controls, and multi-jurisdictional regulatory requirements.
• Draft, review, and revise contracts to ensure legal soundness, regulatory compliance, and alignment with the company’s strategic objectives. This includes negotiating contract terms with external parties to achieve favorable outcomes and safeguard the company’s interests.
• Identify and assess potential risks associated with contracts and implement strategies to mitigate them.
• Support the acquisition and maintenance of all necessary licenses, permits, and regulatory approvals required for project implementation.
• Negotiate and mediate disputes arising during contract execution, leveraging legal expertise to deliver fair and efficient resolutions.
• Provide legal guidance and support to internal teams on contract-related matters and broader legal issues as needed.
• Clearly communicate contract terms and obligations to internal stakeholders to ensure uniform understanding and compliance.
• Collaborate with external legal counsel on legal and/or regulatory matters when necessary and manage legal engagements effectively
• Work closely with project management, finance, procurement, and other departments to ensure cohesive contract management across the organization.
• Conduct legal training and briefings for internal stakeholders to ensure awareness of key legal issues and compliance requirements. 
• Maintain comprehensive and accurate records of contracts, correspondence, and related documentation.
• Oversee and manage claims, arbitrations, and court proceedings related to the company’s projects.
• Participate in ad hoc projects and assignments as directed by management, ensuring all legal and regulatory considerations are addressed.
• Assist in the development and implementation of internal policies and procedures to strengthen legal governance in project execution.