Total 39 technical support engineer job vacancies in Australia

Preparation of designs and deliverables related to secondary electrical systems for transmission and distribution projects. The tasks may encompass, but are not limited to, the following, depending on project requirements and the design phase:

• Design of protection and control systems, including relay settings, protection schemes, and interlock systems for substations.
• Preparation of single line diagrams (SLDs), protection logic diagrams, metering layouts, and cable termination diagrams.
• Preparation of electrical interconnection diagrams, termination diagrams, cable schedules, and other supporting documentation for the installation and operation of secondary systems.
• Relay coordination studies (overcurrent, earth fault, motor protection, distance protection), including relay setting calculations and fault analysis.
• Power system studies, such as load flow analysis, short circuit studies, transient stability analysis, motor starting studies, and arc flash studies.
• Development of control and relay panel layouts, including general arrangement (GA) drawings, functional block diagrams, and bill of materials (BOMs).
• Design of SCADA communication schemes and system integration for protection systems, ensuring seamless interface between control and field devices.
• Review and verification of design documentation to ensure compliance with industry standards (IEC, IEEE) and utility specifications.
• Support for commissioning and testing, including Factory Acceptance Testing (FAT) and site integration of secondary systems.
• Development of algorithms for enhanced system functionality, such as fault detection, relay coordination, and improving system stability.
• Interdisciplinary coordination, including collaboration with other engineering teams to integrate secondary systems with primary infrastructure.
• Preparation of external connection tables, cable schedules, and other design documentation as required by the project specifications.

The responsibilities of this position include, but are not limited to:

• Design of tunnels in both TBM and SEM (Sequential Excavation Methods), especially TBM tunnel lining design
• Contribute to preparation of contract documents, technical specifications, design report and drawing
• Organize independently work plans and design activities for projects of medium/high complexity
• Plan, manage and implement geotechnical investigation programs for tunnel and underground projects
• Perform geotechnical analyses and design based on geotechnical investigation results
• Use commercial numerical modelling tools including both Finite and Distinct Elements software to design tunnels and underground structures
• Autonomously generate and verify excel sheets for structural and geotechnical verifications
• Provide multidisciplinary teams clear knowledge and expertise of the basic principles of soil and rock mechanics and ground-structure interactions
• Participate in teamwork contributing with specific geotechnical and structural experience on underground components of Transportation and Water Conveyance projects
• Support tunnels proposals with technical inputs, including methodologies and techniques
• Supervise and review the work of less experienced engineers, train interns on numerical modelling
• Liaise with other disciplines, professionals, clients

Qualifications

• Degree in Civil, Geotechnical or Structural Engineering with experience in tunneling and underground engineering
• At least 1 years’ experience in tunnels, trenchless structures
• Design Experience with small (OD 6m~8m) and/or large diameter (OD >10m) TBM tunneling method is preferred
• Knowledge of Geotechnical, Hydrogeology, Geological engineering and Rock mechanics
• Knowledge of analytical and numerical analysis methods for underground works and tunnels
• Ability to work with minimal supervision
• Advanced analytical, problem-solving and decision-making skills applied to design activities
• Advanced oral and written skills as well as interpersonal/teamwork skills

We are growing our Electrical presence in our Building Engineering team, based in Perth. We are looking for a Senior Electrical Engineering with strong electrical design experience in a variety of buildings. 

How you’ll make a difference:

• Be influential in the preparation of technical electrical design documentation on building services projects across a variety of industries and market sectors, ensuring high-quality and cost-effective project delivery.
• Work closely with a team of experienced, multidisciplinary engineers on major projects, contributing to project planning, design delivery, and mentoring junior engineers within the business.
• Contribute to projects across the broader team by providing specialised technical advice, applying your knowledge and experience of Australian Standards and reviewing design calculations, specifications and drawings.
• Lead electrical components of major projects across sectors including health, aviation, defence, education, commercial and transport, delivering exceptional outcomes for our clients.
• Liaise with internal and external stakeholders across our expansive multi-disciplinary engineering team to provide high-level technical advice on community-defining projects, with exposure to client-facing roles supported by a Principal Engineer.

Job Description

• Work closely with Senior Process Engineer to deliver projects and assignments including the following responsibilities that follows.
• Develop and design efficient and cost-effective water treatment processes for various applications, such as potable water, wastewater, desalination, and industrial water and wastewater treatment.
• Evaluate client requirements, conduct feasibility studies, and design process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs)
• Conduct performance evaluations, analyze data, and recommend modifications to process parameter equipment, and technologies.
• Evaluate equipment specifications, conduct technical evaluations, and make informed recommendations based on performance, reliability, and cost-effectiveness.
• Define project scope, develop project plans, monitor progress, manage resources, and ensure timely and cost-effective project delivery.
• Professionally manage and engage clients to present detailed solutions.
• Prepare detailed technical reports, design documents, and project updates.
• Document process design criteria and calculations.

Qualifications

• Bachelor's or Master's degree in Chemical Engineering, Environmental Engineering, or Civil
  Engineering
• Strong analytical and problem-solving skills.
• Understand water/wastewater treatment process from an engineering perspective, including cross-
  disciplinary requirements of these projects
• Proficiency in process simulation software and digital design tools (BIM/AutoCAD/Revit/etc)
• Excellent communication and interpersonal skills.

This role sits at the centre of our Business Line operations, providing critical support across reporting, governance, and strategic planning. Working closely with the RBLL, Growth Director, and Sector leadership, you will manage global and local reporting requirements, coordinate key governance forums (QBRs, MBRs), and track progress against growth and operational objectives. You will also play an important role in shaping Business Line communications, coordinating town halls, and partnering with the BL Executive Assistant to ensure consistent and high-quality execution across the team.

How you’ll make a difference

• Prepare accurate and timely global and local business line reports, compile and analyse performance data, and maintain a centralised repository for documents, registers, and reporting tools (e.g., App Matrix, SOFT Reports, Salesforce, Workbench).
• Manage inputs and logistics for QBRs, MBRs, and governance meetings; drive and attend key business line meetings and ensure timely follow-up on actions and decisions.
• In conjunction with the SPM, support client, market, and pursuit reporting; track progress against growth, market, and operational objectives; and assist in the delivery of strategic initiatives and business plans.
• Work closely with the RBLL, Growth Director, and Sector leadership to deliver high-quality reporting and strategic initiatives; collaborate with ANZ Strategy & Growth, Finance, P&C, and other enabling functions to streamline data flows.
• Draft and edit business line communications including LinkedIn content, plan and execute Business Line town halls, and provide day-to-day administrative support in partnership with the BL Executive Assistant and Administrative Assistant.

Responsibilities:

• Assist in daily close supervision and coordination duties of structural works
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Keep quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors, Stakeholders, Authorities, Interfacing Contractors and the like on execution of works

Requirements:

• Diploma in Civil/Structural Engineering
• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• 8 years of relevant experience in quality assurance inspections on C&S works for various building/infrastructure projects
• Willing to work in Sentosa
• 5.5 days work week

We have a fantastic opportunity for an experienced Water Resources professional to join our South-East Queensland Water Resources team.

By joining our team, you will work on the most transformative projects and have access to mentoring and guidance from our industry-leading specialists. You will also be provided with opportunities to collaborate across interstate and international offices as part of the broader Water Resources sector.

With AECOM’s flexibility, you can base yourself in either our Brisbane or Gold Coast office.

How you’ll make a difference

• Be part of a high-performing team delivering hydrologic and hydraulic modelling, drainage design, and integrated water management solutions, with a strong focus on technical excellence.
• Collaborate with multidisciplinary teams across a range of geographies to deliver integrated outcomes.
• Contribute to an exciting and diverse portfolio of projects across all market sectors, including energy, transport, water, environment and government, across South-East Queensland and beyond.
• Support the preparation of tenders and proposals.

Job Description

• Possess knowledge of environmental design, and green building rating tools [LEED, Green Mark, WELL, Smart Score, True Waste, LEAF, ILFI, etc.].
• Conversant with environmental simulations such as energy modelling, daylight analysis, CFD, life cycle carbon analysis.
• Lead projects independently and deliver technical solutions to design and client team.
• Lead pro-active coordination with internal and external disciplines to achieve a high-quality consistent set of presentation and design documents.
• Proactively check and coordinate project documents (including but not limited to multi-disciplinary drawings, design reports, technical specifications, etc.).
• Conversant with project’s contractual requirements and deliver high quality deliverables in established schedule.
• Familiarity with local sustainability regulations and codes.
• Able and motivated to update skills and expertise through continuing professional development (CPD) initiatives.

Qualifications

• Bachelor’s or higher degree in a field related to building engineering, sustainability, architecture
• Minimum five-years’ experience within sustainability consulting or building engineering.
• Possess minimum two green building accreditations, such as Green Mark AP [required], LEED AP [required], WELL AP [desired], TRUE Advisor [desired], WiredScore AP [desired].
• Successful track record of delivering local and international projects in the built environment.
• Effectively multitask and work collaboratively with internal and external disciplines.
• Experience in energy modelling, daylight analysis, CFD, parametric modelling, life cycle carbon analysis, and ESG.
• Software skills in AutoCAD, Rhino, Grasshopper, IES VE, Adobe, One-Click LCA, Ansys, Star-CCM, OpenFOAM
  

We have a fantastic opportunity for an experienced Water Resources professional to join our South-East Queensland Water Resources team.

By joining our team, you will work on the most transformative projects and have access to mentoring and guidance from our industry-leading specialists. You will also be provided with opportunities to collaborate across interstate and international offices as part of the broader Water Resources sector.

With AECOM’s flexibility, you can base yourself in either our Brisbane or Gold Coast office.

How you’ll make a difference

• Be part of a high-performing team delivering hydrologic and hydraulic modelling, drainage design, and integrated water management solutions, with a strong focus on technical excellence.
• Collaborate with multidisciplinary teams across a range of geographies to deliver integrated outcomes.
• Contribute to an exciting and diverse portfolio of projects across all market sectors, including energy, transport, water, environment, and government, across Queensland and beyond.
• Actively support the development and winning of proposals
• You will be empowered to assist with project leadership and mentoring responsibilities to support the development of junior staff.

Key Responsibilities

• Being accountable for traffic engineering and transport planning, modelling delivery and verification on a range of transport projects
• Mentor, guide teams to achieve technical requirements and deliver the projects.
• Good hands-on experience of Strategic modelling software SATURN, DIADEM
• Experience in SATURN network development, Model Calibration and Validation, Demand forecasting and Matrix Estimation. 
• Familiarity with UK/US/ANZ/Middle East transport modelling guidance - (e.g., NPPF, DfT Guidance, Local Plans).
• Mentor and support junior engineers.
• Liaise with clients and AECOM’s global project teams to ensure technical excellence and timely delivery.

• Senior technical resource may serve as technical advisor for team
• Provides specialized technical input to studies and design for staff's specific area of expertise.
• Develops study and design procedures to facilitate high quality cost effective work by others.
• Participates in interdisciplinary review of project deliverables.
• Develops construction cost estimates and estimates of technical efforts for projects.
• Uses expertise in all steps of completing discipline component of PS&E package.
• Performs quality control review of design calculations or drawings.
• Prepares technical specification sections.
• Provides input to the development of engineering budget and schedule to meet requirements.

Duties and Responsibilities

• Performs specific and limited portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with moderate supervision.
• Collaborates with other engineering disciplines to ensure integrated system design.
• Develops and maintains project documentation, including design drawings and specifications.
• Conducts site surveys and assessments for ELV system installations.
• Performs load calculations and system sizing for ELV equipment.
• Ensures compliance with relevant codes, standards, and regulations.
• Participates in project meetings and communicates design concepts to stakeholders.
• Troubleshoots and resolves technical issues during design and implementation phases.
• Stays updated on emerging technologies and industry trends in ELV systems.

• pany in technical forums and industry conferences related to electrical engineering

We are seeking an Engineer- PHE(Building Engineering) to join our B+P team in India. This is an exciting opportunity for a motivated engineer to contribute to impactful marine B+P across global offices and continue developing their technical expertise in a supportive, high-performing team.

Here is what you will do:

• Preparing all project calculations like cold & hot water demand, circulation, booster & transfer pump sizing, rainwater flow rate, cold/hot water & drainage pipe sizing etc.

• Preparing a complete sheet package of Plumbing & Fire service, including legends, schematics,

• details, and floor plans using Revit and AutoCAD.

• Drainage Design includes waste, soil & storm water, parking drain, balcony drain, planter drains, sump pit,

  septic tank, soak away pit, wastewater flow calculation, and grease interceptor.

• Design of Fire sprinkler systems (Wet and dry), Clean agent (FM200), Pre-action and deluge, Foam, Extinguishers, and external fire Hydrants.

• Preparing Plumbing and Fire Protection design planning and mark-ups.

• Developing drawings in Revit for all design stages (Preliminary, Detail, Tender)

• Coordination with other MEP services as well as lead team or client, and monitoring the progress of the project.

• Responsibility for QA/QC of Public Health services.

• Responsible for the preparation of Authority drawings for DEWA, SEWA, DM & Civil defense.

• LPG and NG Demand, tank sizing, and Pressure loss calculations.

• Review/coordination in 2D & 3D using AutoCAD, Revit, and Navisworks software, respectively.

• Coordination with suppliers and Preparing Specifications for the project.

• Performs specific and moderate portions of a broader assignment of an experienced engineer.

• Gathers and correlates basic engineering data using established and well-defined procedures.

• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.

• Proposes an approach to solve new problems encountered using modifications of the standard.

• Software skills: Revit, Navisworks, and Microsoft Word, Excel, etc.

• Assist QP(S) in the daily supervision and coordination duties including civil and structural works, site investigations, building works, etc
• Lead, monitor and supervise RTOs on Site
• Responsible for the consistency of quality assurance inspections and testing for works
• Attend site meetings and resolve technical issues with Contractor
• Keep quality records of all works, monitor & report on work progress
• Review and comment on contractor’s submissions
• To review and supervise safety, environmental and health matters

Qualifications

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering or equivalent.
• Registered as RE with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• Minimum 5 years of experience in C&S works
• Familiar with steel structure and piling inspection, piling load test and excavation works
• Possess strong initiative, and ability to work independently and within team environment when required
• Good interpersonal, written and verbal communication skills
• Willing to work in Sentosa
• 5.5 days work week
  

Company Overview

AECOM is a global leader in infrastructure and support services, delivering innovative engineering, design, and management solutions across transportation, environmental, energy, water, and government sectors. It employs 45,000 professionals in over 150 countries.

Job Summary

Lead the design and implementation of mechanical systems for infrastructure and building projects, collaborating with multidisciplinary teams to deliver optimized, compliant solutions on time and within budget.

Responsibilities

• Lead the design, development, and implementation of mechanical systems for infrastructure and building projects to meet client and regulatory requirements
• Collaborate with multidisciplinary teams to coordinate design efforts and ensure timely project delivery
• Conduct detailed mechanical analysis and calculations to optimize system performance and efficiency
• Develop and maintain comprehensive technical documentation, including design specifications and reports, to support project execution
• Ensure all mechanical designs comply with industry standards, regulations, and quality control measures
• Present technical solutions and progress updates during client meetings to facilitate informed decision-making
• Monitor industry trends and emerging technologies to incorporate innovative approaches into mechanical designs
• Drive continuous improvement initiatives within the engineering department to enhance processes and outcomes
• Manage project budgets, timelines, and resources to achieve project goals effectively

Required competencies and certifications

• Bachelor’s degree in Mechanical Engineering
• Minimum of 8 years of mechanical engineering experience focused on building services design
• Proven leadership in managing complex mechanical engineering projects
• Proficiency in 3D modeling software such as SolidWorks or Inventor, and AutoCAD
• Experience coordinating multidiscipline design teams
• Strong analytical and problem-solving skills applied to mechanical engineering challenges
• Effective communication and leadership skills to guide teams and engage stakeholders
• Competence in project management and budget control to ensure project success
• Ability to work efficiently in fast-paced, collaborative environments