Total 775 structural engineer job vacancies in Quality Assurance / Control category in Australia

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Manage the full spectrum of Quality Assurance and Quality Control activities, including equipment buy‑off (IBO and CBO) requirements and timely closure of internal and external CARS.
• Continuously review and update QA systems, workflows, and documentation; spearhead improvement initiatives to drive performance beyond compliance with standards.
• Drive supplier quality performance through audits, qualification, and re‑certification of vendors, supporting the company’s supply chain development efforts.
• Compile weekly and monthly QA reports, ensuring clear communication of quality performance and improvement actions across teams.

Requirements:

• Diploma in Mechanical, Production, or Mechatronics Engineering.
• At least 3 years of QA experience in a manufacturing environment.
• Proficient in metrology tools and techniques (e.g., Vernier Caliper, Micrometer, Height & Depth Gauge, Profile Projector, Gauge Block, Smart Scope) and problem‑solving methods such as 8D discipline, FMEA, and QC data analysis tools.
• Strong communication skills, detail‑oriented, proactive, and able to drive quality improvement programs independently while working effectively in a team.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Participate in NPI quality assurance activities (APQP) for PCBA, assembly, and testing.
• Develop and maintain QMS documentation (procedures, instructions, standards, validation protocols).
• Conduct internal, process audits and support external audits.
• Manage customer/supplier complaints using 8D methodology.
• Monitor and analyze QMS metrics for continuous improvement.
• Prepare weekly/monthly quality reports.

• Bachelor’s degree in Electronics, Mechanical, Mechatronics, or Quality Management.
• Minimum 3 years of experience in QA/QMS, preferably in PCBA.
• Hands-on experience with PCBA/assembly processes (SMT, soldering, assembly).
• Experience or knowledge of Lean manufacturing and Kaizen methodologies.
• Strong knowledge of PCBA, assembly, and testing processes.
• Strong knowledge of IPC-A-610, ESD, AQL, GD&T, ISO 9001/IATF 16949 (APQP, PPAP, NCR, CAPA).
• Experience in audits, complaint handling, and data analysis.
• Proficient in ERP systems and MS Office.
• Fluent in Vietnamese; English proficiency (4 skills) is an advantage.
• Strong analytical mindset, cross-functional collaboration, proactive and accountable.

• Full salary-based social insurance (BHXH)
• Daily lunch allowance provided
• Attractive 13th‑month salary
• Company laptop and necessary work equipment
• Shuttle bus for employees between HCMC and the factory
• Long‑term career development opportunities in the electronics manufacturing industry
• Engaging, supportive, and dynamic international working environment
• A performance‑driven culture that values curiosity, ownership, and meaningful results

Salary: 

We appreciate everyone's efforts and experiences, so we offer an attractive salary matching your skillset and field expertise. 

If you have any questions, please do not hesitate to contact our recruitment colleague Eden Le via tuyendung@tlt-electronics.com.

• Participate in NPI quality assurance activities (APQP) for PCBA, assembly, and testing.
• Develop and maintain QMS documentation (procedures, instructions, standards, validation protocols).
• Conduct internal, process audits and support external audits.
• Manage customer/supplier complaints using 8D methodology.
• Monitor and analyze QMS metrics for continuous improvement.
• Prepare weekly/monthly quality reports.

• Bachelor’s degree in Electronics, Mechanical, Mechatronics, or Quality Management.
• Minimum 3 years of experience in QA/QMS, preferably in PCBA.
• Hands-on experience with PCBA/assembly processes (SMT, soldering, assembly).
• Experience or knowledge of Lean manufacturing and Kaizen methodologies.
• Strong knowledge of PCBA, assembly, and testing processes.
• Strong knowledge of IPC-A-610, ESD, AQL, GD&T, ISO 9001/IATF 16949 (APQP, PPAP, NCR, CAPA).
• Experience in audits, complaint handling, and data analysis.
• Proficient in ERP systems and MS Office.
• Fluent in Vietnamese; English proficiency (4 skills) is an advantage.
• Strong analytical mindset, cross-functional collaboration, proactive and accountable.

• Full salary-based social insurance (BHXH)
• Daily lunch allowance provided
• Attractive 13th‑month salary
• Company laptop and necessary work equipment
• Shuttle bus for employees between HCMC and the factory
• Long‑term career development opportunities in the electronics manufacturing industry
• Engaging, supportive, and dynamic international working environment
• A performance‑driven culture that values curiosity, ownership, and meaningful results

Salary: 

We appreciate everyone's efforts and experiences, so we offer an attractive salary matching your skillset and field expertise. 

If you have any questions, please do not hesitate to contact our recruitment colleague Eden Le via tuyendung@tlt-electronics.com.

• Develop and debug test programs for Digital, PMIC, RF & Mixed Signal products on ATE platforms (Advantest 93k – SmarTest 7/8, Teradyne UFLEX).
• Collaborate with design engineers on first silicon bring-up, device characterization across PVT, and production release.
• Perform digital vector debug (JTAG, SCAN, ATPG, Functional, MBIST) and characterize Mixed Signal IPs (ADC, DAC, PLL, etc.).
• Support production ramp-up, yield improvement, and test time optimization through cross-functional teamwork.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 2 years of Test Engineering experience, with hands-on skills in Teradyne UltraFlex or Advantest 93K ATE.
• Good knowledge of analog and digital electronics.
• Strong analytical and problem-solving skills, with a passion for hands-on work in a lab environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Quality Assurance Engineer

· Perform Quality Assurance/Quality Engineering to ensure components, finished products and processes meet established specifications.

· Analyse material and processes and make recommendations/ take action to correct deficiencies.

· Troubleshoot equipment and process issues. Summarize and draw conclusions from test results leading to effective technical resolution of process problems.

· Disposition non-conforming material requiring advanced process/technical knowledge. Work directly with suppliers to prevent or correct discrepant material

· Perform detailed Root Cause Investigation of failed product or processes using various quality tools (5 Whys, 6 M, Ishikawa Diagram, Pareto Charts).

· Implement corrective and preventative actions.

· Work with Production, Manufacturing/Process Engineering to create validation protocols, summaries and approvals to resolve process issues and implement changes.

· Initiate corrective action requests on discrepant product/processes and verify adequacy and accuracy of corrective action taken internally and/or externally

· Apply knowledge of process control tools, statistical sampling, and other analytical techniques to maximize the quality and flow of product through the production line.

· Develop and review documented operating procedures associated with material inspection or processes

Our requirements:

• Min Diploma or Degree in Biomedical Engineering
• Min of 2 years’ experience in QA Biomedical Engineering
• Must possess excellent team work and interpersonal skills with a strong emphasis on good analytical skills
• Possess good customer interactions skills
• Sound ability to troubleshoot and repair
• Good communication skills

Interested candidates do send in your resume to wendykhoo@recruitexpress.com.sg

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

Purpose: Responsible for manufacturing and engineering processes consistently meet internal quality standards and customer requirements. Lead MRB and support CAB activities, drive cross-functional 8D problem-solving and spearhead data-driven and system improvement projects to enhance product and process quality. Collaborate with internal teams and external stakeholders to resolve quality issues, support new production introductions, and maintain compliance with industry standards.

Key Area of Responsibilities:

• Assist in maintain Non-Conformities and Error Management processes and systems.
• Chair Material Review Board (MRB) & Corrective Action Board (CAB).
• Manage non-conforming materials disposition. Lead cross-functional teams to drive robust corrective and preventive actions.
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations.
• Support Customer Quality Engineering to investigate customer product complaints.
• Lead and perform manufacturing process audit.
• Assist in First article quality planning. Ensure first article readiness in quality inspections, measurements and documentations.
• Support set-up processes and systems for first article quality assurance.
• Manage first article non-conformity disposition.
• Drive NPI and PQP quality requirements in new products.

• Degree in Mechanical Engineering/Electrical or other relevant qualification.
• Minimum 2 years of experience as a Quality Engineer in MNC, preferred in the semiconductor/semiconductor equipment, electronics, or high-tech instrument industry.
• Good knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Understanding of First Article Inspection requirements and expectations.
• Experienced in Quality Management System (ISO9001, IATF16949).
• Experience in leading cross-functional teams for problem solving.
• Understanding and experience in supplier quality management.
• Good in statistical knowledge and 6-sigma methodology.
• Certified Black Belt or Green Belt preferred.

About us:

Cyrus Technology started in 2005 with the vision to approach polymeric tooling design in unconventional methods and providing manufacturing solutions to exacting specifications for ultra-precision and complex moulding. We pride ourselves as a valued partner to our clients, offering expertise at every stage of the product design to manufacturing, to transform market opportunity ideas to a marketable product. With the progress we achieved so far, we aim to continue to push boundaries and overcome constraints to be a leader in the industry.

About the Job:

The Quality Department plays a very important role in Cyrus in maintaining the quality management system and driving quality improvements to deliver high quality products for our customers. You will be working closely with the Assistant Quality Manager on Quality Management System (QMS) and suppliers’ management.

Your key responsibilities are as follows:

- To participate in procedures for Supplier Management process such as supplier on-boarding, selection and approval process by assessing and evaluating supplier profile; visiting and auditing of supplier facility and process, initiating supplier quality agreement review, and establishing good partnership with suppliers.

- To evaluate and monitor supplier performance and collaboration with suppliers to identify opportunities for enhancements and improvements.

- To support new supplier/material qualification by ensuring that all supplier on-boarding related documentations and action are complete, and that quality of purchased material meets the required standards and expectations.

- To communicate and work closely with external suppliers and internal stakeholders (Procurement, Warehouse and Manufacturing) on supplier/material qualification related projects, material quality related issues. To address on purchased material failures/defects and derive proper preventive and corrective action plans through SCAR system.

- Implement quality inspection standards on incoming and outgoing inspections.

- Responsible for timely closure of Corrective and Preventive Actions (CAPA) , non-conformance investigation reports and customer complaints and publish reports on quality performance .

- Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.

- Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms etc) to ensure system compliance and ready for Management Review.

- Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits.

- Review audit findings and develop action plans to drive continuous improvements.

- Perform any other duties as assigned .

Your areas of knowledge and expertise that matter most for this role:

- Diploma in quality management / Engineering / Manufacturing or related field

- Minimum 3 to 5 years of relevant working experience in handling audits and ISO documentation in manufacturing industries.

- Knowledge in Supplier Management

- Knowledge of quality Management Standards such as ISO 9001, 14001, 13485 and ISO 22301.

- Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

- Familiar with 8D and 5W problem solving methodology.

- Good communication and presentation skills

- Organized and detail oriented.

- Positive attitude with ability to multi-task.

- Independent, takes initiatives and able to work with minimum supervision.

-Good team player with good initiatives and ability to work independently.

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Semiconductor Industry

• Monday - Friday (8.30am - 5.30pm)

• Basic salary up $7000 + AWS + VB + Allowance

• North Area

Job Responsibilities:

• Be responsible for on-site quality control of the company's silicon photonics chip production process (wafer testing, wafer dicing, chip visual inspection, etc.).

• Monitor production process quality data, analyze process fluctuations using quality tools such as SPC and FMEA, identify potential quality risks, propose process improvement measures and promote their implementation.

• Lead the investigation, analysis and solution of quality abnormalities in the production process (such as dicing chipping, visual inspection defects, test parameter abnormalities, etc.), formulate corrective and preventive actions, track and verify the effect, and reduce the process defect rate.

• Be responsible for the formulation and update of quality inspection standards for the production process, train front-line operators and inspectors to ensure that they master quality requirements and operating specifications.

• Regularly conduct process quality reviews, summarize quality data of each station, form process quality reports, and promote continuous quality improvement in the production link.

• Cooperate with PDQE, FA and other positions to participate in new product introduction, failure analysis and other work, and provide process quality related support.

Job Requirements

• Microelectronics, Semiconductor or related majors, with more than 3 years of PQE work experience in the semiconductor or silicon photonics chip industry; familiarity with wafer dicing, chip testing, visual inspection and other processes is preferred.

• Master process quality control methods and tools (SPC, FMEA, 8D, 5Why, etc.), and be able to independently carry out process quality analysis and improvement work.

• Familiar with the silicon photonics chip production process; those with a process background are preferred; understand the working principle and quality control points of equipment at each station (dicing equipment, test equipment, visual inspection equipment).

• Strong ability in problem analysis, communication and coordination, and execution, able to quickly respond to quality problems in the production process.

• Familiar with the ISO9001 quality system, with basic English/Mandarin reading and writing skills, able to read English/Mandarin technical documents."

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives

Responsibilities

• Set up, calibrate, test, and troubleshoot circuits, components, instruments, and mechanical assemblies
• Develop or follow test specifications, methods, and procedures based on drawings and diagrams
• Test assemblies and final systems; perform rework as needed
• Prepare technical reports detailing findings and recommended solutions
• Assist in selecting and setting up specialized test equipment

Requirements

• Nitec / Diploma in Engineering
• Ability to read technical drawings and operate precision testing instruments
• Hands-on experience with semiconductor equipment; optics alignment experience a plus
• Strong troubleshooting, analytical, and data analysis skills
• Excellent communication, teamwork, and interpersonal skills
• Comfortable working in shifts and cleanroom environments

Interested applicants, please click on “Apply Now” or submit your resume to ref68@trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: John Angeline

EA Personnel Reg No: R1544851

Working Hours: 08:30am - 06:00pm (Mon-Fri)

Job Description

• Review, update and maintain Quality Management System procedures.

• Verify & ensure process documentation compliance; Work Instruction, Quality Inspection Plan, Date Sheet & Inspection Reports, etc.

• Lead & guide QC Inspectors in ensuring work compliance.

• Oversee in-process and outgoing quality inspections and work with internal team teams to resolve quality issues in daily manufacturing process.

• Responsive towards resolution of process non-conformance.

• Follow up customer complaints by communicating with internal teams for containment actions, root cause analysis, corrective and preventive actions.

• Managing documentation control system, as well as audits (Internal/external).

• Ensure Customer environmental survey and other relevant requests are completed in a timely and orderly manner.

• Support QA/QC activities, assisting in projects when required & providing additional support when necessary.

• Any other ad-hoc duties as assigned.
  

**Successful candidate will be provided on-the-job training

Job Requirement

• Minimum Diploma/Degree in Quality Management/Mechanical/Manufacturing Engineering/Chemistry/ Chemical Engineering or equivalent.

• Min 1 year related working experience in manufacturing settings.

• Min 1 year of experience in Quality / Supplier Quality in a manufacturing environment working in a ISO regulated environment.

• Knowledge in ISO 13485, ISO 9001 and ISO 14001.

• Team player with good working attitude.

• Able to start work immediately.

• Comfortable to work at East area, Changi South.

Responsibilities:

- Responsible for all incoming, in-process and outgoing goods inspection

- Responsible for ISO 9001 External Audit and Customer Evaluation Audits

- Conduct audit to ensure compliance with specifications and system

- Control of Non-conformance products via issue and analysis of CAR

- Routinely review the procedures to ensure their compliance with the system

- Support qualification sample-making and evaluation

- Propose internal control for process monitoring

- Monitor vendor quality performance

- Perform any other ad-hoc duties as and when assigned

Requirements:

• Diploma in any engineering discipline
• Minimum 1-2 years of working experience in QA-related jobs
• Independent & self-motivated
• 5 days a week, located in Woodlands
• Applicants should be Singaporean citizens or PR

CONTRACT / PERMANENT JOBS!

QA Automation Test Engineer

SINGAPOREANS/PRs ONLY

Salary -$7,000- $12,000 per month

LOCATIONS

Singapore

ABOUT THE ROLE

We are looking for an experienced and highly motivated Senior Automation Test Engineer with proven expertise in Java Selenium, as well as modern front-end testing tools like Cypress and Playwright. You will be responsible for creating scalable automation frameworks, executing tests across web and API layers, and integrating testing into CI/CD pipelines in Agile environments

JOB DESCRIPTION

• Design and develop automation frameworks using Selenium (Java), Cypress(JavaScript/TypeScript),and  Playwright.
• Collaborate with developers and QA teams to define and implement test strategies across UI and API layers.
• Automate test cases for functional, regression, and integration testing for web applications.
• Perform cross-browser, cross-platform, and responsive testing.
• Build and maintain scalable test scripts and integrate them with CI/CD pipelines (Jenkins, GitHub Actions, GitLab CI).
• Conduct API testing using REST Assured or Postman and validate backend services.
• Create detailed, comprehensive, and well-structured test plans and test cases.
• Troubleshoot issues, identify root causes, and ensure quality across releases.

JOB REQUIREMENTS

• 6+ years of experience in test automation with expertise in Java Selenium.
• 2+ years of hands-on experience with Cypress and/or Playwright.
• Strong understanding of modern automation frameworks like POM, BDD, or hybrid models.
• Proficiency in scripting and writing automation tests in Java, JavaScript, or TypeScript.
• Experience in API automation testing using REST Assured, Postman, or Super Test.
• Familiarity with CI/CD tools such as Jenkins, GitLab CI, or GitHub Actions.
• Solid grasp of Agile methodologies and working in a Scrum team.
• Version control using Git or Bitbucket.

PREFERRED QUALIFICATIONS

• Exposure to Docker, Kubernetes, or cloud-based testing platforms(e.g., Browser Stack, Sauce Labs).
• Performance testing experience with tools like JMeter or K6 is a plus.
• ISTQB Certification or equivalent is an added advantage.

What Our Client Offer:

• Competitive salary and attractive benefits
• Dynamic and innovative work environment
• Opportunities for personal growth and development
• Engaging and collaborative company culture

Interested applicants, please email detailed to-

SERVICE CONNECTIONS HR CONSULTANCY PTE LTD

Email resume to - servcon@singnet.com.sg / recruit@serviceconnections.com.sg

OR

Call for more details please call at 6333 0052
Mondays to Fridays
9.00am - 5.00pm

111 North Bridge Road
#07-30 Peninsula Plaza
Singapore179098
www.serviceconnections.com.sg
License no: 09C4937 / R11022931