Total 113 engineering job vacancies in Maintenance / Repair category in Australia

Key Roles and Responsibilities

• To troubleshoot and maintain/service security systems at clients’ premises
• Attend to fault calls during/after office hours
• Support Maintenance Lead to upkeep Clients’ security system inventory list and maintenance spares
• Support Maintenance Lead to liaise with clients, integrated facility management representatives and trade contractors so as to facilitate to carry out work at clients’ premises
• Liaise closely with clients, integrated facility management representatives on all service/maintenance related issues to achieve optimal results.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as required including new installations, A&A, HOTO, T&C and equipment replacement etc

Requirements

• Diploma/Higher Nitec/Nitec in Engineering/IT or relevant working experience in the related field
• Hands on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems, CCTV systems and Electronic Key Management System.
• Additional knowledge in hardware configuration, System Networking and integration with third-party systems will be an advantage
• Must be a team player,Independent and willing to take ownership and Pro-active in Problem solving
• Driving License (Car or Motorbike) – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Work Location is at 3 Shan Road/Clients’ premises
• 5 days work week
• Require to perform rotational standby duties
• Experience Candidate will be considered for Maintenance Engineer
• Fresh Graduates keen to seek a career path in security system are welcome to apply as a Maintenance Technician

Job Description

• To carry out maintenance and repair to ensure equipment are in good working conditions and quality
• Maintaining of records and repair activities
• Basic plumbing installation knowledge
• Perform other tasks as assigned by the Management
• Able to do Sales presentation to prospective clients via virtual or face to face
• Provide after-sales services and maintain good relationships with clients

Job Requirement

• Candidates without experience but possess the right attitude will be considered
• Have own vehicle (Motocycle preferred)
• Able to work independently
• Responsible and able to work in a team
• Good interpersonal
• Plumbing knowledge will be an advantage

Additional Information

• Comprehensive training provided
• Candidates with no prior experience are welcome to apply
• Has own transportation a plus
• Location: 45 Sungei Kadut Loop
• 5.5 days work week

We are a growing engineering and home services company seeking a skilled Electrical Technician / Licensed Electrician (LEW) to join our team. The role involves electrical installation, maintenance, and project support for residential and commercial properties.

Key Responsibilities

• Perform installation and maintenance of lighting fixtures, ceiling fans, switches, sockets, and DB boxes for residential (HDB/Condo) and commercial premises
• Carry out single-phase and three-phase wiring, conduit installation, and electrical modification works in compliance with SS 638 standards
• Conduct testing and commissioning, including insulation and earthing tests, ensuring safety and compliance
• Support project execution by assisting with site measurements, material estimation, and client coordination
• (For LEW licence holders) Endorse electrical works, perform safety assessments, and submit relevant applications to EMA

Requirements

• Nitec / Higher Nitec in Electrical Engineering or equivalent qualification
• Possession of a valid EMA Electrician Licence (LEW) is highly preferred (higher salary will be offered accordingly)
• Must hold valid Work-at-Height (WAH) and CSOC (Construction Safety Orientation Course) certificates
• At least 1–2 years of relevant local electrical work experience in Singapore
• Familiar with Singapore electrical standards and regulations
• Able to communicate in basic English and Mandarin (to liaise with clients and team members)
• Possess Class 3 driving licence will be an advantage
• Responsible, detail-oriented, and safety-conscious

We are looking for a motivated and detail-oriented Failure Analysis Technician to join our team. Prefer fresh graduate or experience. In this role, you will be responsible for investigating and analyzing product failures using Optical Microscope, Atomic Force Microscopy (AFM), OSA and ZYGO  to determine failure defect and support the development of solutions that enhance product reliability. Your hands-on skills and technical expertise will play a critical role in our quality assurance processes.

Industry: Medical Device / Manufacturing
Location: Changi
Salary: Up to $4,800
Working Hours:

• Initial phase: Monday to Friday, 8:00 a.m. – 5:00 p.m.
• After 2 years: Rotating shifts (morning / afternoon)
• Company transport provided (selected MRT locations)

Job Responsibilities

• Support equipment transfer, setup and validation activities
• Troubleshoot mechanical, electrical and software issues
• Perform system testing and factory acceptance testing
• Support maintenance and improvement of production equipment
• Review, update and manage technical documentation
• Work with vendors and internal teams on engineering projects

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026  

Email : kimlow@recruitexpress.com.sg

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Job Responsibilities

• Work with partners in the development of BIM Execution Plan and ensure Micron standards are incorporated.

• Ensure BIM standards, process, etc, as defined in BIM Execution Plan are executed, maintained and updated throughout project lifecycle.

• Manage and maintain model organization and folder structure within the Common Data Environment(CDE) as defined in BEP/Micron standards.

• Supervise and assist with maintenance of project models; conduct quality control/health checks on federated models and associated trade models to ensure completeness, accuracy and adherence to the project’s BIM Execution Plan throughout the project lifecycle.

• Manage and assist model setup and maintenance by partners.

• Participate in BIM coordination meetings to assist coordination and resolution of model issues and clashes.

• Prioritise coordination efforts base on construction plans and changed conditions.

• Generate clash numbers to monitor clash resolution progress and clash reports.

• Ensure contractors use coordinated BIM models to prepare work sequence with subcons.

• Assist pre-construction teams with constructability reviews.

• Facilitate contractors to arrange review sessions of the coordinated BIM models with Micron operations team for space management inputs.

• Perform regular QA/QC field walks to ensure field installations match coordinated models.

• Ensure shop drawings are done base on coordinated 3D models to minimise and avoid reworks.

• Ensure partners utilized BIM models for design change analysis and approval prior to shop drawing production and construction.

• Assist in maintaining drawings done within Revit.

• Assist and lead any 3D scanning/reality capture initiatives.

• Ensure models are updated to as-constructed and as-built conditions using reality capture solutions for accuracy.

• Ensure data required for facility management are entered and maintain throughout construction.

• Assist site personnel in navigating the models and retrieving data and information from BIM models.

• Assist in providing existing information from BIM models for future expansion projects.

• Point of contact for all BIM related matters for both internal and external partners.

• Work with the project team with project workflow to establish and maintain consistent graphic standards on individual assigned projects. This includes the interdisciplinary consistency between all MEP services.

• Ensure accuracy of as-constructed/as-built basebuild design for next in line users (eg, tool install team) to be able to start design work early without having to perform multiple field verifications.

• Require to perform BIM modelling and data updates during operations in maintaining the digital twin accuracy to site conditions.

• Perform periodic audits to maintain up-to-date information with the digital twin throughout the facility’s lifecycle.

• Provide training to team members on the use of BIM platforms and BIM related software.

• Site representative to support global assignments.

Job Requirements

• Tertiary education in Engineering related to AEC industry (Architectural, Engineering, Construction).

• Passion for BIM and its’ uses beyond design and construction.

• Minimum 3 years BIM experience working in large scale manufacturing industry projects.

• Semiconductor project experiences a plus.

• Familiar, good knowledge and experience in reality capture or Scan to BIM technologies.

• Familiar with BIM Common Data Environment (CDE) platforms.

• Good understanding of BIM software (Revit, Navisworks, Plant 3D, Tekla, Archicad, Sketchup, etc.)

• Have desires to learn and adopt AI ideas for BIM. 

• Able to work independently.

• Knowledge of dynamo, python, C# a plus but not essential.

• International travel may be required.
  
  

  Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

• Well Established Company
• Basic $3000 - $3800 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: North
• Working hours: Normal Working Hours
• Training provided for those without/lesser experience

Job Responsibilities:

• Hands-on experience in maintenance and troubleshooting of electrical and/or PLC based systems
• Responsible for maintaining systems located in northern region
• Identification of potential issues
• Liaise with team members, clients or others for problem resolution
• Other ad-hoc duties as assigned

Job Requirements:

• Minimum Nitec in Engineering, preferably Electrical, Electronics or Automation
• Candidate without or with lesser experience are welcome as Training will be provided
• Possess valid Class 3 Driving License

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

As a Senior Engineer, Instrumentation & Controls for the Global Facilities Engineering department at Micron Technology, Inc., you will be responsible to provide Engineering system ownership and technical support for the planning, design, construction, operations, and maintenance programs of the critical Facilities systems. In this role, you will support the Micron Semiconductor Manufacturing sites across the network, including Facilities and Manufacturing teams, through all phases of design, construction, installation, start-up, operations and maintenance with focus and emphasis on Global Standardization and Alignment, Innovation, Reliability and Performance, and Sustainability.

The Facilities system ownership and responsibilities include for the I&C, FMCS, SCADA, Life Safety Systems, Toxic Gas Monitoring, Telecom, and Security systems, as well as the Controls interfaces with other Facilities Mechanical, Electrical, Process, and Building systems.  This role will also lead the Facilities Digitalization and SMART Facilities program initiatives.

Provide Technical Support, Leadership, and Expertise

• Provide consultation and support to Global, Regional, and Site Facilities and Manufacturing teams as the Technical Field Domain Expert.

• Collaborate with internal partners and collaborators including Technology Development Team, Procurement, Finance, Legal, etc.

• Analyze system designs to identify improvements that will result in better performance, efficiency gains, reduced maintenance, and cost savings

• Support sites with problem analysis using standard tools and methodologies as requested

• Benchmark within and external to Micron sites on Engineering Best Practices and Best Known Methods (BKM) of Facilities buildings and systems

• Maintain technical knowledge domain expertise on your respective subject area including for Industry Standards and Best Practices, Trends and Technological advances, emerging technology roadmap, Design Innovations, Sustainability, Digitalization, etc.

Provide Design and Construction Project Support, Leadership, and Expertise

• Support the Micron Global, Regional, and Site Design and Construction project teams in the Engineering and Design development for new large-scale, Facilities Infrastructure Expansion projects

• Develop, review, and maintain the Micron Global Design and Construction Standards and Construction Specifications with focus and emphasis on Engineering Design and Construction of your respective systems.

• Develop the system design concepts for your respective field systems to be deployed into the Design and Construction Projects, including for Control System Architecture, System P&IDs, Sequence of Operations, and Functional Description of System Operations

• Ensure that project scope meets customer and requestor needs

• Ensure appropriate communication and collaboration with Facilities, Design, Construction, Procurement and Manufacturing stakeholders, to deliver project objectives and results

• Perform timely review of design packages and providing documented comments and feedback as necessary.  Ensure designs are in compliance with all standards, codes, and regulations

• Monitor progress and provide Engineering and Design support during construction projects

• Provide support for project cost and schedule estimates and justification for approval

• Provide supervision and coordination of Consultant resources 

• Review capacity planning databases and system operating trends across the network and validating utilization and diversity factor assumptions

• Participate and/or lead capacity and scenario planning across the network, including evaluation of system and distribution capacity impacts based on scenario changes

• Review and advise on scope, schedule, and cost estimates for Facilities infrastructure additions or modifications

Provide Global Initiatives Program Support, Leadership, and Expertise

• Develop, review, and maintain Micron Global Best Known Methods (BKM) documents with focus and emphasis on Operations and Maintenance Reliability and/or Performance

• Lead & own the Global Facilities Programs & Initiatives, including establishing and defining the program objectives, roadmaps, and high-level implementation plan

• Lead the Global Facilities Digitalization and SMART Facilities Programs in support of Micron’s Corporate Digitalization goals and initiatives

• Lead the Global Facilities Sustainability Programs in support of Micron’s Corporate Sustainability goals and initiatives

• Collect and consolidate Lessons Learned and feedback from Micron Global, Regional, and Site teams to incorporate into the Micron Global Standards and BKMs

Job Requirements:

• Bachelor’s Degree in Mechanical, Electrical, Chemical, or Industrial Engineering required

• Minimum 7 to 10-years experience in Semiconductor and/or Facilities related industry

• Technical expertise, knowledge, and experience on Facilities and Semiconductor Instrumentation and Controls systems, including I&C, FMCS, SCADA, Life Safety Systems, Toxic Gas Monitoring, Telecom, and Security systems, as well as the Controls interfaces with other Facilities Mechanical, Electrical, Process, and Building systems

• Ability to prioritize and schedule workload and work on multiple tasks concurrently

• Good organizational skills and Service demeanor

• Excellent interpersonal skills and good team working skills, English Required

• Self-motivated worker

• Familiarity with Semiconductor Manufacturing and Facilities systems

• Ability to travel internationally 15-25% of the time on average, but up to 30% of the time during Critical Project phases or Site Activities

JOB SUMMARY

Sets up and operate injection-molding machines. Responsible of maintenance of injection processes to meet standard cycle times and quality requirements. Ability to properly handle material, molded product and related inventory control. Must have experience and knowledge of proper operation of manufacturing and material handling equipment.

JOB RESPONSIBILITIES

• Install mold on machine according to work order specifications
• Responsible for molding machine set up including ancillary equipment as related to the molding process
• Follow and document process parameters to ensure repeatable results
• Performs all the function and responsibilities of a material handler
• Performs mold changes
• Process molding parameters to achieve quality parts and optimized cycle times
• Set up End of Arm tooling for robotic part removal and trimming
• Address unacceptable reject levels
• Respond to machine alarms in a timely manner
• Responsible for proper handling and care of all materials, molds and tooling
• Responsible for clear and consistent communication between shifts
• Responsible for the continuous operation of production equipment
• Responsible for backup in the absence of the material handler
• Responsible for housekeeping of the shop floor.
• Ensure a positive work environment and awareness of company goals and objectives
• Any other responsibilities assigned by Superior to meet company objective.

EDUCATION and EXPERIENCE

• Technical Education or engineering related
• Preferably a minimum of 1-year hands-on working experience in injection molding with hands-on experience in scientific molding methods and experience in handling & troubleshooting of molds preferred (Fresh graduates can be considered as on the job training will be provided)

JOB-RELATED SKILLS & PRE-REQUISITES

• Good communications skills
• Work closely with production tech (T1 AND T3)/Process Engineer to carry out technical analysis of problems and implementation of solutions
• Interaction with relevant persons in technical discussions

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Business – Advanced Networks & Sensors

Our Advanced Networks& Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

As a Testing Technician(RF), you will be a key member of our production team to drive efficiency and quality of the product.  Working closely with the product manager and project leads, you will be part of a development team to delivery high quality products to both local and international clients.

Be Part of Our Success

• Involvement in Production testing scope.
• Operates and maintains simple test equipment appropriately to measure and perform RF PCBA & module tuning and testing
• Perform duties with minimal supervision
• Integrates continuous improvement concepts and techniques into work
• Performs other duties as assigned

Qualities We Value

• Knowledge in Electrical /Electronics / Telecommunications Engineering or relevant fields
• Preferably with 1–3 years’ experience in semiconductor, electronics, mechanical parts, or manufacturing environment
• Open to shift work
• Competent in handling miniatures with tweezers
• Ability to handle and solder components using a microscope
• Ability to produce consistent quality workmanship on repetitive manual processes
• Able to do documentation, generate of ATR report, and data entry skills
• Open to contract, renewable

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working Location: Ang Mo Kio

• Regularly checking and maintaining building systems like electrical, plumbing, HVAC, and fire protection to prevent breakdowns and ensure efficiency.
• Conducting thorough inspections of buildings, equipment, and appliances to identify faults and ensure proper functionality.
• Supervising and coordinating with contractors for scheduled maintenance and repairs.
• Ensuring adherence to safety regulations and guidelines.
• Maintaining accurate records of maintenance work, defects, and repairs.
• Providing technical advice and assistance to other staff members or contractors.
• Monitoring building systems for optimal performance and identifying potential problems.
• Addressing immediate issues and complaints.

Structure Technician

-      3-5years working experiences in aircraft structural (composite) modification /structure (composite) repairs

-      Able to perform aircraft structural (composite) modification / repairs independently

-      Able to understand Structure (composite) Repair Manual

-      Able to understand Structure (composite) Drawings

-      Able to guide and mentor junior technician / trainee

-      Able to lead a small structure (composite) technician team on modification / repair

Job requirements

-       MRO industry for at least 5 years to perform structure repairs and modifications independently

-       Prior working knowledge on Airbus and Boeing aircrafts like B767, B777, A320, A330 will be advantageous

-       Strong foundation in structure hand skills and special tooling usage

-       Ability to interpret engineering drawing

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer(OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Requirements

• Candidate must possess EMA Electrical Worker Licence namely Electrician's Licence (EMA LEW Grade 7), Electrical Technician's Licence (EMA LEW Grade 8).
• Candidate must possess at least Nitec education.
• Preferably LEW specialized in electrical work or electrical installation.
• Preferably at least 2 year(s) of working experience.
• Able to start within a short notice and or immediate
• Preferably experienced in Facilities Management environment.

Responsibilities

• Able to lead a team of technicians for troubleshooting works
• Able to coordinate A&A works independently.
• Coordination with clients and contractors. A&A etc.

Roles and Responsibilities:

• Support in the facilities management services, which include M&E support of the building
• Assist in the supervision of contractors in planning, coordination and execution of corrective, preventive maintenance, integrated system tests and annual building shutdown activities
• Assist in the preparation of regular reports for internal and external customers
• Assist in cost management and price negotiation with the vendors
• Support in other Ad-hoc project

Requirements:

• Diploma in Mechanical/Electrical or Facilities Management or its equivalent
• Certified Senior Fire Safety Manager will be considered a priority
• Relevant experience in Facility Building Maintenance services, ACMV equipment/chillers
• Knowledge in BMS or M&E infrastructure will be an advantage
• Excellent interpersonal and communication skills
• Shift work required (3 rotating shifts: Morning, Afternoon and Night)

The LEW Technician ensures that facilities are safe and functional by performing preventive and corrective maintenance activities. He/She conducts technical troubleshooting for mechanical and electrical issues in compliance with the quality and safety standards, regulations and organizational Workplace Safety and Health (WSH) practices.

Roles and Responsibilities:

• Perform daily operational activities which includes attending to customers' enquiries, needs and complaints
• Perform preventive and breakdown technical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers, and electrical control
• Ensure all LEW paperwork/documentations are completed and filed in accordance to regulatory standards.

Requirements

• Possess LEW certificate with EMA or hold a valid Licensed Electrical Worker (LEW) certification of Grade 7
• Nitec in Mechanical / Electrical or related field
• Candidates with 2 years or more related experience in Facilities Management will be an added advantage
• No experience is welcome to apply (on Job Training)
• Positive attitude, good interpersonal and customer-centric skills
• Rotating Shift required (2 shifts, Morning and Afternoon)