Total 6,490 it technician job vacancies in Australia

JOB DESCRIPTION:-

• Assist IT Manager on troubleshoot hardware, software and network operating system.
• Provide orientation to new users of existing technologies.
• Assist IT Manager on control the computer system budgets and expenditure.
• Assist IT Manager on setup and support for CCTV system for admin department.
• Assist IT Manager to ensure all IT hardware are dismantled and secured prior to authorize disposal.
• Prepares technical reports by collecting, analysing, summarizing information and trends to identify potential issues or requirement for improvement or upgrade.
• Perform other related duties as required during working hours.

JOB REQUIREMENTS:-

• Sound understanding of computer systems (software/hardware), networks etc.
• Candidate must possess at least Advanced Diploma in information technology or equivalent.
• At least 1 year of working experience in the related field is required. 

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Regular team activities
• Open culture
• Paid training and development

Job Scope :

• Conduct routine checks on chiller operations, including chilled and cooling water temperatures, and inspect all service line utilities (water, compressed air, and natural gas) for leakage. Any defects or problem must be reported immediately to the Supervisor / HOD.
• Check and record compressor operating parameters, including pressure, temperature, motor current (ampere), slide valve position, motor speed, oil level, and running hours.
• Carry out water analysis for town water samples, including town water, drinking water, cereal water, and DPRS water.
• Record water meter readings daily.
• Attend breakdown plant in case trip or power down.
• Handel ammonia chiller troubleshooting isolation valve check area leaking & fix leaking area.
• Measure and record water conductivity, pH, and ORP for cooling towers (SA, RM, Nescafe, and chilled water systems), and inspect and clean water filters.
• Follow safety procedures and wear appropriate PPE when working with chillers, cooling towers, compressors, and ammonia or other work that requires PPE.
• Report any accidents or safety incidents immediately to the Supervisor / HOD.

Perks & Benefits

• Medical insurance
• Shift Allowance
• Overtime

WE ARE HIRING: Engineer / Technician

Join COSMOWAVE – Malaysia’s Sole Distributor for Industrial Leak Testing Equipment.

We are looking for hands-on individuals ready to grow in a dynamic, field-based environment.

Key Responsibilities

。Installation, commissioning, and servicing of leak testing equipment

。Provide on-site troubleshooting and technical support

。Equipment calibration and performance verification

。Deliver after-sales technical assistance

。Prepare service and technical reports

Frequent Outstation Required

This role involves regular travel to customer sites. You will gain valuable hands-on industrial exposure and real-world technical experience.

If you prefer active, field-based work instead of being desk-bound, you will fit right in.

Requirements

。Hands-on technical skills and problem-solving mindset

。Willing to travel for outstation assignments

。Responsible, proactive, and eager to learn

。Relevant experience is an advantage (Fresh graduates are encouraged to apply)

。Ability to communicate in Mandarin is preferred (due to business communication needs)

Why Join COSMOWAVE?

。Competitive salary package

。Technical training and skill development

。Fast-track practical experience

。Exposure to advanced industrial testing technology

。Young and supportive working environment

。Clear career growth opportunities

At COSMOWAVE, you are not just taking a job — you are building real technical expertise for your future!

Job Scope:

• Maintain computer-related hardware equipment.

电脑相关硬体设备维护

• Operate and support office software applications.

电脑文书软体操作使用

• Manage network security and hardware systems

网络资安硬体管理

• Candidates with relevant IT certifications are preferred.

具有相关电脑证书尤佳

• Perform other duties assigned by supervisors

其他主管交办事项

Salary: RM 2,600 ~ RM 4,000

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Personal leave

Kertih Terminals Sdn. Bhd (KTSB) is a joint venture company between PETRONAS Chemicals Group Bhd (40%), Dialog Equity Sdn Bhd (30%) and Vopak Terminals Penjuru Pte Ltd (30%). KTSB is a service oriented logistics company in providing centralized tankage facilities for various petrochemical plants at PETRONAS Petroleum Industrial Complex in Kertih, Terengganu Darul Iman, Malaysia. KTSB was incorporated on 5th April 1997 and we have employed more than 160 employees to manage and operate our 42 storage tanks with the total capacity in excess of 400,000 cubic meters. With excellent prospects for long-term stability and growth, the company invites qualified individuals to apply for the following position based in Kerteh, Terengganu:-

INFORMATION TECHNOLOGY (IT) EXECUTIVE 

Job Role Summary:-

Responsible for the day-to-day operation, maintenance, and support of KTSB IT systems and infrastructure, ensuring high availability, reliability, security, and compliance. Supports 24-hour terminal operations through hands-on IT services, infrastructure management, vendor coordination, and operational governance.

Expected Level of Proficiency:-

Minimum Qualification/Education

Bachelor’s degree in relevant field such as Accounting, Finance, Business Studies, Economics or a related field or Diploma in Information Technology, Computer Science, Networking or equivalent.

 Experience

At least 5 years’ experience in ICT for degree holder or 10–12 years relevant IT experience for diploma holder, preferably in terminal, industrial, or oil & gas environments.

Specialized Knowledge & Skills

•          IT operations, servers, networks, cloud services, and cybersecurity controls

•          Incident, problem, change management (MOC)

•          Root Cause Analysis / Root Cause Failure Analysis (RCA / RCFA)

•          Internal & external audits including ISO certifications

•          IT procurement processes (PR, PO, invoice verification)

•          Vendor management and documentation control

•          HSE awareness in hazardous and 24-hour operational environments

Key Accountabilities:-

• Provide daily operational support and preventive maintenance for IT systems, networks, servers, and end-user devices.
• Act as primary IT support contact for employees, contractors, and operational teams Maintains company ledgers and daily financial transactions.
• Implement IT security controls, access management, and compliance with company IT policies.
• Manage internal and external IT audits, including ISO certification audits and corrective action tracking.
• Execute IT procurement administration including PR raising, PO coordination, invoice verification, and Finance liaison.
• Manage and participate in Management of Change (MOC) processes for IT systems and infrastructure.
• Conduct or support RCA/RCFA for IT incidents and system failures.
• Coordinate outsourced IT vendors and service providers.
• Maintain IT documentation, asset registers, configuration baselines, and licensing records
• Support IT projects, upgrades, system migrations, and infrastructure improvements.
• Ensure compliance with HSE requirements during all IT activities

Only shortlisted candidates will be notified.

Perks & Benefits :-

• Allowance (travel stipends, transportation, etc.)
• Regular team activities
• Medical insurance
• Paid training and development

Concrete Plant Technician – Job Scope

• Perform routine inspection, maintenance, and troubleshooting for batching plant machinery and equipment.
• Ensure concrete batching plant operates smoothly and efficiently at all times.
• Repair and service electrical, mechanical, hydraulic, and pneumatic systems.
• Monitor plant performance and identify any operational issues or breakdowns.
• Carry out preventive maintenance according to maintenance schedule.
• Coordinate with plant operators and production team to minimize downtime.
• Maintain and troubleshoot control panel, sensors, motors, and batching system.
• Ensure calibration and accuracy of weighing and batching equipment.
• Record maintenance activities, repair works, and spare parts usage.
• Ensure plant machinery complies with safety and operational standards.
• Assist in installation, testing, and commissioning of new plant equipment.
• Respond immediately to emergency breakdowns and technical issues.
• Monitor spare parts inventory and report shortages when necessary.
• Maintain housekeeping and cleanliness of workshop and plant area.
• Follow company SOP, safety regulations, and site requirements.

Perks & Benefits

• Personal leave
• Paid training and development

Concrete Plant Technician – Job Scope

• Perform routine inspection, maintenance, and troubleshooting for batching plant machinery and equipment.
• Ensure concrete batching plant operates smoothly and efficiently at all times.
• Repair and service electrical, mechanical, hydraulic, and pneumatic systems.
• Monitor plant performance and identify any operational issues or breakdowns.
• Carry out preventive maintenance according to maintenance schedule.
• Coordinate with plant operators and production team to minimize downtime.
• Maintain and troubleshoot control panel, sensors, motors, and batching system.
• Ensure calibration and accuracy of weighing and batching equipment.
• Record maintenance activities, repair works, and spare parts usage.
• Ensure plant machinery complies with safety and operational standards.
• Assist in installation, testing, and commissioning of new plant equipment.
• Respond immediately to emergency breakdowns and technical issues.
• Monitor spare parts inventory and report shortages when necessary.
• Maintain housekeeping and cleanliness of workshop and plant area.
• Follow company SOP, safety regulations, and site requirements.

Perks & Benefits

• Personal leave
• Paid training and development

ASG Security Sdn Bhd is seeking a motivated and experienced Service Technician to join our growing team in the security systems industry.

The ideal candidate is hands-on, reliable, and passionate about delivering quality service and technical support. You will be responsible for the installation, troubleshooting, maintenance, and servicing of security systems while ensuring excellent customer satisfaction.

Join a company that values teamwork, professionalism, and continuous growth, and be part of a dynamic environment with opportunities to develop your technical skills and career.

Job Responsibilities

Perform installation, maintenance, configuration, testing, commissioning, and troubleshooting of CCTV, Card Access, Intrusion Detection Systems, networking, storage, hardware, and software.

Attend to customers’ queries, support, services, and issues.

Involved in cabling, wiring, mounting, and termination works.

Report site details, work done, project progress status, customer requests or feedback, and issues to the reporting Manager/Supervisor.

Update the documentation and provide operational training.

Liaise/manage with suppliers/vendors and outsourced contractors for delivery works.

Requirements

Candidate must possess at least a Professional Certificate, Diploma, Advanced Diploma, or Bachelor’s Degree in Engineering (Electrical/Electronic, Computer/Telecommunication, others)

3 years of relevant work experience in a similar industry.

Possessed a driving license with own transport (Car).

Basic knowledge in cabling, networking, electronics, & computer.

Strong analytical, excellent communication, and interpersonal skills.

Able to work independently with minimal supervision.

A team player to achieve corporate goals.

Ability to accept new challenges, develop new skills/knowledge, and constantly engage in learning new technologies, methods, and processes.

Must be willing to work overtime or late hours when required for project/site support.

Why Join Us?

✅ Career growth opportunities

✅ Exposure to enterprise security systems

✅ Supportive team environment

✅ Training and skill development opportunities

Perks & Benefits

Allowance (travel stipends, transportation, etc.)

Nearby public transport

Paid training and development

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)

Scope : Responsible for all indoor and outdoor repairing and servicing jobs. To ensure all jobs are done in an effective and efficient manner to meet Company’s short and long term objectives and to execute all jobs according to Company’s Values.

Job Description

• Responsible to assist Head of Department to ensure all repair and service
• jobs are completed in timely manner according to department standard of procedure.
• Site inspection, troubleshoot and provide resolution for customer pumps problem.
• Ensure all reports and records are updated after completion of work.
• Responsible for material planning for service department when necessary.
• Mechanical troubleshooting.
• Pump overhaul job.
• Carry out maintenance checklist, preventive and corrective maintenance.
• Fabrication job.
• To carry out any other duties & ad-hoc assignments as when needed.

Requirements

• Candidate must possess at least Secondary School/SPM/"O" Level,
• Higher Secondary/STPM/"A" Level/Pre-U, Professional Certificate in Mechanical / Electrical Engineering or equivalent.
• Required language(s): English and Bahasa Malaysia.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Basic electrical / mechanical knowledge for troubleshooting will be added advantage.
• Familiar with mechanical tools, i.e. welding equipment.
• Hardworking, reliable and positive working attitude.
• Must be willing to travel outstation when necessary.
• Possess valid driving licence.

Perks & Benefits

• Open culture
• Personal development opportunities
• 5 working days.
• Work Location : Johor Bahru
• • Able to start work immediately will be an advantage.

Job responsibilities:

• Handling walk-in customer and sales team in related to service related process.
• Attend ad-hoc service case (Klang Valley) whenever is needed from time to time basis.
• Assist service supervisor on related task with service operation process.
• Stock keeper & inventory monitoring for spare part.
• Perform any other ad-hoc duties as assigned by management.

Job specifications:

• Min. SPM qualification.
• Able to converse & read English & Malay language.
• Microsoft words & Excel. (For data entry only).
• Experience in inventory management.
• Added advantage for technical knowledge with problem solving skills.

Perks & Benefits

• Medical include wellness
• EPF
• Sosco

WE ARE WELCOME for any roles that related to Manufacturing CNC Machines.

Responsibilities:

• Setup independant machine and offset adjustment according to the drawing provided.

• Requirements: Not necessary possess at any certificate exp like Diploma/Bachelor's Degree but priority and advantage if available.
• Related working experience will be an added advantage.
• Good command of language; both written and spoken in English and Bahasa Malaysia.
• Known about basic equipment caliper , micrometer and dial indicator.
• Motivated, willing to learn, hardworking, result-oriented and a team player.
• Good communication and interpersonal skills.
• Ability to work independently.
• Training will be provided.
• If you are able to programming and setup independently we may discuss furtherly for salary pay.
• Fresh graduates are encouraged to apply.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Attendance benefit
• Personal leave
• Panel Clinic
• EPF & Socso
• Personal development opportunities
• Remote work flexibility

Job Responsibilities:

• To involve in preparing installation, assembling, commissioning & troubleshooting of security systems such as CCTV, Card Access System, intelligent alarm monitoring systems and etc.
• To involve in testing of in-house as well as 3rd party security products.
• To help customers to solve technical issues.
• To involve in servicing of security products.
• To report service & repair status to their respective supervisor.
• To assist in preparation & submission of various technical reports to their respective supervisor.
• To provide system or product training to the customers 

Requirement:

• Required Skill(s): Microsoft Office, Technical Knowledge in ELV Systems, ,ICT and computer is an added advantage.
• Analytical thinking and Good Self Discipline
• Ability to work independently without much supervision.
• Ability to work flexible shifts and to adapt to change work schedules.

Perks & Benefits

• Annual leave
• Personal development opportunities
• Medical Allowance
• Provide Company's Transport
• Hard ship Allowance
• Bonus

Reports to: Factory Manager or Operations Manager

Working Hours: Monday - Friday (830am - 5pm), Saturday (830am - 1pm) - alternate Saturday arrangements may be requested upon confirmation

Open to Malaysian nationals only.

Job Summary

The Maintenance / Instrument Technician / or Assistant Engineer is responsible for ensuring the efficient, safe, and reliable operation of all facility and production equipment systems, including HVAC (chiller systems), electrical, mechanical, and plumbing infrastructure. This role supports continuous manufacturing operations by performing preventive maintenance, troubleshooting breakdowns, and coordinating repair activities to minimize downtime and ensure compliance with safety and regulatory standards.

Key Responsibilities

1. Maintenance & Repair

• Perform scheduled preventive maintenance (PM) and corrective repairs on HVAC systems (including chiller systems), electrical systems (including 3-phase), and mechanical equipment.
• Ensure all equipment operates at optimal performance to support uninterrupted manufacturing processes.

2. Troubleshooting & Breakdown Response

• Diagnose, troubleshoot, and rectify equipment faults and system breakdowns in a timely and efficient manner.
• Implement effective corrective actions to minimize production downtime and prevent recurrence.

3. Monitoring & Inspection

• Conduct routine inspections and facility walkthroughs to identify abnormalities such as unusual noise, vibration, heat, or leaks.
• Monitor equipment performance and record relevant operational data for analysis and improvement.

4. Contractor & Vendor Coordination

• Supervise and coordinate external contractors for specialized maintenance, repairs, calibration, and facility improvement works.
• Ensure all contractor activities comply with company safety and operational standards.

5. Safety & Compliance

• Adhere to and enforce all health, safety, and environmental procedures, including Lock-Out Tag-Out (LOTO).
• Ensure all maintenance activities comply with internal policies and regulatory requirements (e.g., GMP where applicable).

6. Documentation & Reporting

• Maintain accurate and up-to-date maintenance records, logs, and checklists.
• Manage spare parts inventory and ensure timely replenishment of critical components.
• Prepare reports on maintenance activities, breakdowns, and improvement initiatives.

7. Continuous Improvement

• Support initiatives to improve equipment reliability, efficiency, and maintenance practices.
• Provide input on process improvements, equipment upgrades, and cost-saving measures.

8. Ad-hoc Responsibilities

• Perform any other duties and ad-hoc tasks as assigned by management from time to time, in line with operational requirements.

Job Requirements

Education

• Certificate or Diploma in Mechanical, Electrical, or a related engineering discipline.

Experience

• Minimum 3–5 years of hands-on experience in facility or equipment maintenance, preferably in a manufacturing environment.

Skills & Competencies

• Strong technical knowledge of HVAC (chiller systems), electrical (3-phase), and mechanical systems.
• Ability to read and interpret technical drawings, schematics, and manuals.
• Proficient in troubleshooting and problem-solving under time-sensitive conditions.
• Able to work independently with minimal supervision and as part of a team.
• Proficient in English/Bahasa, Mandarin a plus

Physical Requirements

• Physically fit and able to:
• Lift up to 25kg
• Climb ladders
• Work in confined or elevated spaces

Preferred Attributes:

• Experience in GMP-regulated or manufacturing environments
• Basic knowledge of utilities systems (RO water, compressed air, etc.)
• Familiarity with preventive maintenance systems and documentation practices 
• Able to communicate and work efficiently and coordinate with operations team and management

Perks & Benefits

• EPF, SOCSO, EIS
• Medical Insurance
• All gazetted public holidays observed
• Annual leave up to 16 days/year subject to years of employment
• Commission and bonus - subject to individual and company performance
• Paid training and development - HRDF claimable courses subject to relevancy

Responsibilities:

• Perform highly diversified duties to install and maintain production machines.
• Provide emergency/unscheduled repairs of production equipment during production.
• Translate and interpret equipment manuals and work orders to perform required maintenance and service.
• Diagnose problems, replace or repair parts, test and make adjustments.
• Perform regular preventive maintenance on machines, equipment and plant facilities.
• Utilise a variety of hand and power tools, electric meters and material handling equipment in performing duties.
• Identify faulty operations, defective material and report those and any unusual situations to proper supervision.
• Adhere to safety regulations and maintain clean and orderly work areas.

Requirements:

• Proven experience as maintenance technician.
• Basic understanding of electrical, hydraulic and other systems.
• Familiarity of general maintenance processes and methods.
• Working knowledge of tools, common appliances and devices.
• Manual dexterity and problem-solving skills.
• Solid physical condition and strength with a willingness to work overtime.
• Minimum SPM/O level or equivalent; Certificate in HVAC, building maintenance technology or relevant field will be a plus.
• Certified Maintenance

Perks & Benefits

• Open culture
• Personal development opportunities

Responsibilities:

• Operate, maintain, and troubleshoot factory utility systems, including electrical power distribution, compressed air systems, chilled water and cooling systems, HVAC, gas supply, scrubber systems, and wastewater treatment plant (WWTP) equipment.
• Perform water sampling and basic laboratory testing (e.g., pH, COD, BOD, TSS), analyze results, and adjust chemical dosing as required to ensure compliance with standards.
• Ensure a stable and continuous supply of utilities to production lines and critical equipment.
• Monitor utility performance and identify abnormalities to prevent production downtime.
• Carry out general maintenance and handyman tasks as assigned by the supervisor.
• Execute preventive maintenance (PM) activities for all facility and utility equipment.
• Perform troubleshooting and corrective repairs with minimal disruption to production.
• Identify recurring issues and support root cause analysis and implementation of corrective actions.
• Provide on-site technical support during production hours.
• Respond promptly to any facility-related issues affecting production.
• Assist in machine installation, relocation, and commissioning from a facilities perspective.
• Ensure compliance with EHS, fire safety, and regulatory requirements.
• Adhere to shutdown/startup procedures, permit-to-work systems, and contractor safety guidelines.
• Support internal audits, customer audits, and regulatory inspections.
• Participate in emergency response situations (e.g., power failure, gas leaks, fire alarms, water leaks).
• Maintain accurate records for maintenance, breakdown reports, and utility consumption.
• Support 5S practices and maintain good housekeeping in facility areas.
• Provide on-call or shift support for facility-related emergencies.
• Carry out any other duties as assigned by the Company.

Requirements:

• Minimum Diploma or Certificate in Engineering (Electrical, Mechanical, Mechatronics, or related field).
• At least 1–3 years of working experience in factory facilities, utilities, or maintenance environment.
• Basic knowledge of facility systems such as electrical distribution, HVAC, compressed air, chilled water, and wastewater treatment systems.
• Ability to perform basic troubleshooting and maintenance of equipment.
• Familiarity with preventive maintenance (PM) practices and safety procedures.
• Knowledge of EHS (Environment, Health & Safety) requirements and regulatory standards is an added advantage.
• Ability to work in a fast-paced manufacturing environment and support production needs.
• Willing to work on shifts, on-call, or during emergency situations when required.
• Good teamwork, communication, and problem-solving skills.
• Responsible, disciplined, and able to work independently with minimal supervision.

Perks & Benefits

• Allowance
• Medical insurance
• Open culture